Yarisworld Archive

Yaris sedan low and high beam

11 posts · 16,354 views

jorizkOriginal postLebanon · Jul 25, 2009#1
Hello fellow yaris owners:) How are you doin' ?
Yaris's my first car I have been owning it for 3 years, I have the 2006 1.5 L sedan model, and I say honestly that's it's quite awesome!

Now let's talk about the beams. I noticed some while ago that when I engage the high beam the low beam turns off. Now There are cars that leave the low beam on when the high beam's on. And if you pull the high beam nob towards you (for flashing with the high beam), there's a brief moment when both lights are on. So I wanna ask is there a way to make them both work when the high beam's engaged (high beam nob pushed forward), and why do they do it like this? Is there a temperature problem if they are both on(since they both light up from the same bulb) or is it an electrical problem (they draw too much power if both on)..

Thanks a lot mates !

Replies 10

Kaotic LazagnaCentral Valley, CA · Jul 25, 2009#2
Welcome, I'm not too knowledgeable on electronics, but it may be due to the fact that the highbeam and lowbeams are on the same bulb. Either that, or your guesses. hehe.
jorizkThread starterLebanon · Jul 25, 2009#4
Well yeah I guess this is the reason.. but it sucks:P
Let me explain how my light nob works. If the low beam's on, and you pull the light nob, then the high beam turns on and then the low beam turns off. So if you pull it a little you can hold it in a position where both lights are on.. (but it's not practical, i mean driving and holding the nob in the same time:P) Sure sucks.. the light when both beams are on is awesome:D
yaris-meAnaheim, CA · Jul 25, 2009#5
It sound easy to me. Take the high beam wire from the knob and attach it to a new switch. Now you can add high beam anytime.👍
PatrickJohnsonMurfreesboro, TN · Jul 25, 2009#6
to put it simply, you DON'T WANT them both on. It's like that for a reason, and most cars do this. It is for the reasons mentioned above, and it is dangerous to have them both on constantly, you can melt your housing.
Yaris HiltonBristol, Tennessee, USA · Jul 25, 2009#7
The bulb's envelope may overheat and pop, and the filaments will be operating above their normal temperature. You can anticipate short bulb life.
jorizkThread starterLebanon · Jul 26, 2009#8
Oh okay :) Thanks a lot mates !!
evoyuinGaithersburg, MD · Feb 23, 2010#9
Hi everyone, I'm new to this forum, I would like to bump this subject if thats ok. I recently bought a 2010 yaris hb. I also have an mitsubishi evo, i wanted to know how much power is going thru for headlights?
FalconeerDubai · Mar 1, 2010#10
Total the wattage on the head lamps and add a bit (10%) for safety... or just check the fuse.
evoyuinGaithersburg, MD · Mar 2, 2010#11
thank you very much, this helps me with whether or not i should convert to HID's and if i need the relay wires.