radioactive77Original postdetroit · Nov 19, 2006#1this is a picture of my girlfriends yaris system a did recently.
infinity subwoofer and 5 channel infinity amp. and pic of were i mounted the tweeters.
3 attachments not included in this copy
Replies 24
spkrman2 · Nov 20, 2006#2nice
grimezAmes, Iowa · Nov 20, 2006#3So did you botch the first set of tweeters? or is that 2 tweeters?
eTiMaGoBangkok, Thailand · Nov 20, 2006#4those are manual mirror controls 😆
radioactive77Thread starterdetroit · Nov 20, 2006#5thats just one tweeter on one side. and yes manual mirrors, its my girls car she went from a jeep liberty to this, she doesnt real care about those features.
the_saintOmaha, somewhere in middle america · Nov 20, 2006#6 Originally Posted by radioactive77
thats just one tweeter on one side. and yes manual mirrors, its my girls car she went from a jeep liberty to this, she doesnt real care about those features.
At 3x the fuel economy I wouldn't complain about piddley little creature comforts either! 👍
ChinoCharlesOH · Nov 20, 2006#7Looks nice.
azyaris07Gilbert, AZ · Nov 20, 2006#8That looks pretty sharp! I have the same amp, and haven't been sure how to mount it, how did you build out the trunk mounting?
grimezAmes, Iowa · Nov 20, 2006#9lol, i had no idea what the manual controls looked like. Anyway, how are those subs implemented? They look beautifully stock!
Waysidenew york · Nov 21, 2006#10Flawless install!
Any "in progress" pictures?
Details on sub construction, amp mounting?
ChinoCharlesOH · Nov 21, 2006#11I smell fiberglass.
grimezAmes, Iowa · Nov 21, 2006#12Thats what i figured, looks hawt! Wonder if I could get a similar thing goin in the back of a hatchback...
ChinoCharlesOH · Nov 21, 2006#13 Originally Posted by grimez
Thats what i figured, looks hawt! Wonder if I could get a similar thing goin in the back of a hatchback...
You could, although I would do it this way...
Fiberglass enclosure / Stereo system There are clean installs, and then theres the "damn, I didn't even know it was there" install. Doesn't get any better than that!
radioactive77Thread starterdetroit · Nov 21, 2006#14thanks for all the great responses. the amp was just suspended using radio backstraps screwed to the floor and metal behind the factory carpet.
the sub enclosure started by taping of all the areas i was going to fiberglass. after that i began fibergalssing. once the glass was dried i took it out and thickened it up with more glass, and then put a layer of durglass on it to make it even harder.
i then bulit a mdf speaker ring and used mdf scraps to suspend it in position. i then wrapped it with speaker carpet cause i didnt have any fleece around. glassed it then put a layer of duraglass. then sanded it then put body filler on it sanded it then finished it with carpet mounted it by putting a screw through the box before i mounted the sub in the box.
i will post some other pictures later on
punchBarrie, ontario · Nov 21, 2006#15 Originally Posted by radioactive77
thanks for all the great responses. the amp was just suspended using radio backstraps screwed to the floor and metal behind the factory carpet.
the sub enclosure started by taping of all the areas i was going to fiberglass. after that i began fibergalssing. once the glass was dried i took it out and thickened it up with more glass, and then put a layer of durglass on it to make it even harder.
i then bulit a mdf speaker ring and used mdf scraps to suspend it in position. i then wrapped it with speaker carpet cause i didnt have any fleece around. glassed it then put a layer of duraglass. then sanded it then put body filler on it sanded it then finished it with carpet mounted it by putting a screw through the box before i mounted the sub in the box.
i will post some other pictures later on
you should make and sell these, i would buy if the price is right...
Waysidenew york · Nov 21, 2006#16 Originally Posted by radioactive77
the amp was just suspended using radio backstraps screwed to the floor and metal behind the factory carpet.
Actually, the amp appears to be mounted to a carpeted board of some type?
Did you remove the factory carpeting behind the sub before masking off the glassed area?
Just curious...
KSIbuckyFond du Lac, WI · Nov 21, 2006#17how much
radioactive77Thread starterdetroit · Nov 21, 2006#18the amp has just a "beauty panel" over it to cover up the wires ad backstraps.
as far as building more it would cost a pretty penny im sure i personally used 75 dollars in material and spent about a good 8-10 hours on it becuase of all the curing times. if i personally had to build it i would say about 550 shipped to most places. but turn around time would be a good 2-3 weeks.
radioactive77Thread starterdetroit · Nov 21, 2006#19i did not remove the factory carpet at all, thats the form i wanted to box to fit perfect in.
johnnyfiveMilwaukee WI · Nov 21, 2006#20looks good, just curious what kind of volume you got in that box?
i did the same thing, but took it twords the seats a bit farther, havnt finish the fronts yet though, because still in the air on choice of subs :)
radioactive77Thread starterdetroit · Nov 22, 2006#21about 1.15- 1.2 cubic feet
azyaris07Gilbert, AZ · Nov 27, 2006#22That rocks! thanks for the info, I really appreciate it!
vodkalushRochester, NY · Nov 27, 2006#23I have be amp attached to the back of my 60/40 seats (on the 40); just wondering anyone else do this?
radioactive77Thread starterdetroit · Nov 27, 2006#24most installs i do at circuit people put the amps on the back of the seats, its pretty common
radioactive77Thread starterdetroit · Nov 22, 2013#25Been a loooooooong time since ive been on but i figured you guys and gals would be the must interested obviously but i am selling the subwoofer box for the yaris.
Fits one 12" subwoofer, if i remember correctly i believe it to be between .75 and 1.00 cubic feet
asking $175 shipped to lower 48 states if interested best way to get in contact is to email me at
josh@mattssi.com thanks everyone!