Yarisworld Archive

Question about mounting HU

13 posts · 4,387 views

grimezOriginal postAmes, Iowa · Nov 17, 2006#1
I am planning on getting a DVD capable HU, and adding an in dash screen later. Will this bracket work for doing two seperate single DIN head units?

And if not, is there any bracket out there that will work? Or am I going to have to modify one?

Replies 12

barrywareChicago · Nov 17, 2006#2
No... It will not work for two HU's. This is the same bracket I bought (same vendor too). The pocket under the opening is not removable. Call Metra directly (www.metraonline.com), talk to one of their technical support guys. They will tell you the part number of the mounting kit (in your case). Then find someone who carries it. You can not buy from Metra directly unless you are a distributor. Circuit City is a distributor but when I called them, they had none in stock (the one I used) so I got it from E-Bay.
grimezThread starterAmes, Iowa · Nov 17, 2006#3
Which one did you get... lol.
barrywareChicago · Nov 17, 2006#4
Originally Posted by grimez
Which one did you get... lol.
That would be the METRA 99-8216!!! 😳
Yaris-TJTijuana, Mexico · Nov 17, 2006#5
excertp from same ebay page "If you what to install a Double Din in your New Yaris, please check out my Ebay store. Search by Metra model number 95-8202 Thank you.
"
the_saintOmaha, somewhere in middle america · Nov 17, 2006#6
Attention to detail my friend....



Originally Posted by barryware
No... It will not work for two HU's. This is the same bracket I bought (same vendor too). The pocket under the opening is not removable. Call Metra directly (www.metraonline.com), talk to one of their technical support guys. They will tell you the part number of the mounting kit (in your case). Then find someone who carries it. You can not buy from Metra directly unless you are a distributor. Circuit City is a distributor but when I called them, they had none in stock (the one I used) so I got it from E-Bay.
+
Originally Posted by grimez
Which one did you get... lol.

=
Picture not included in this copy
grimezThread starterAmes, Iowa · Nov 17, 2006#7
Originally Posted by the_saint
Attention to detail my friend....
I assumed that he had the same problem, not that he was just giving advice... just a misunderstanding and a lil confusion on my end 🤷

I am not looking for a bracket to install a single 2-DIN unit, I am looking for a bracket that will eliminate the gap between two single 1-DIN units. I don't know if my previous posts made that clear (being an engineer, I naturally have a hard time communicating with others).
barrywareChicago · Nov 17, 2006#8
Originally Posted by grimez
I assumed that he had the same problem, not that he was just giving advice... just a misunderstanding and a lil confusion on my end 🤷
Dude...I knew you were teasing. Call Metra and tell them what you want to do. If they have a mounting kit available, you can get the part number and then look for it.

Originally Posted by Yaris-TJ
excertp from same ebay page "If you what to install a Double Din in your New Yaris, please check out my Ebay store. Search by Metra model number 95-8202 Thank you.
"
Originally Posted by the_saint
Attention to detail my friend....
I understood what you are trying to do. The 95-8202 is not what you want. 😉
spkrman2 · Nov 18, 2006#9
i'd just fab something up for this.
johnnyfiveMilwaukee WI · Nov 18, 2006#10
the metra kit that is made for double din headunit, has a stacked single din provision. that is the kit you want, sorry i do not have the part number ;)
ViolinNew Jersey · Nov 18, 2006#11
Not two head units, but I used the metra double DIN kit for this install and put a length of black adhesive foam tape at the seams:

1 attachment not included in this copy

Black YarisToledo, OH · Nov 18, 2006#12
Violin, are those 2 drawers above your head unit?
eTiMaGoBangkok, Thailand · Nov 18, 2006#13
That's his cupholders so he can always have 3 cans of brew at close reach 😆

I've seen the same kind of getup here, but with 3 or 4 sliding trays for keeping CDs in.