WRLEOOriginal postSan Francisco · Nov 15, 2006#1We finished the Intake system today.
Tried a Cold Air config, The car didnt like it much, the intake tube was too long.
We did a Medium lengthed intake system, the car liked it better.
Then we finally did a Short Ram intake and the car totally liked it.
Here are the dyno results and Video's for your enjoyment.
Picture not included in this copy Stock intake:
Picture not included in this copy WR Secret Weapon Intake:
Picture not included in this copy Video Link:
http://www.weapon-r.com/images/forum...s/CIMG4279.AVIReplies 67
GalavoxxSan Francisco · Nov 15, 2006#2Looks and sounds good. Can't wait to pick it up. Too bad about the header. I would have preferred that over the intake. Guess I'll take what I can get. lol I have first dibs on the next header test.
WRLEOThread starterSan Francisco · Nov 15, 2006#3You'll Def be on the list..
I hope i can sort it out Asap.
GalavoxxSan Francisco · Nov 15, 2006#4Sweet. I'll see you tomorrow.
EddyCocaineWI · Nov 15, 2006#5how much you think this will be costing us guys and gals?
ItsMyDailyLos Angeles, CA · Nov 16, 2006#6wow thats interesting that the cold air did not show better gains. Any comparisons?
WRLEOThread starterSan Francisco · Nov 16, 2006#7PM for details..
The Cold air only yielded like 3 Horsepower, my experience tells me that the tubing length is too long for this small engine. It takes too long and takes too much effort for this engine to take in air with a cold air. It was much much hapier with a short ram intake and right behind the headlight. We have a ram air kit that we can add to this kit also.. Which reminds me, there is a nice hole in the bumper to mount the scopp for the ram air kit. NICE....
boris13Royal Oak, MI, USA · Nov 16, 2006#8What kind of filter are you using for the short ram intake? Would this type of intake hurt fuel economy, and if so, to what degree?
CASTREXCosta Rica · Nov 16, 2006#9I'm a little confused now... How come TRD and AEM provide CAI's if a short tube will perform better?? I believe AEM CAI claims about 5HP gains....
I supposed also that the short intake set up will be much less expensive than the overpriced AEM and TDR, right?
When can we expect the intake and header to be available?? Would you offered a combo?? That would be nice!
KatanaUnder the hood! · Nov 16, 2006#10I don't think that a longer tube will create any problems.
Look my CAI, which is pretty long
Picture not included in this copy
GalavoxxSan Francisco · Nov 16, 2006#11 Originally Posted by Katana
I don't think that a longer tube will create any problems.
Look my CAI, which is pretty long
Picture not included in this copy
I don't think it's a matter of creating problems, I think it's more like, what works best for this motor. This is the case for most performance mods. Each mod is going to net a different gain depending on the application. I do agree with CASTREX though, seems a little odd that TRD and AEM have CAIs claiming up to five. They do say up to five though so maybe they are really pulling closer to 2 or 3. Beats me without a dyno pull using either of those intakes. What is the approximate RWH rating for the numbers you got Leo? Or I guess Front Wheel Horsepower (FWH)...
mikeukrainetzCanada · Nov 16, 2006#12im 80% through building my own that looks EXACTLY like the one shown by WRLEO...
Always nice having scraps lying around.
GalavoxxSan Francisco · Nov 16, 2006#13I drove it back from South San Francisco over McClaren Park. The intake makes a very nice difference over stock. I didn't think I would really feel that much extra power considering intake mods I've done on previous cars. The low end really feels stronger and the motor pulls better and revs faster and smoother all the way to red line. Plus the sound around 4000 and up is oh so sweet. Now I know what all you guys with the CAIs have been talking about. I can already see my gas mileage headed to the toilet based on wanting to hear that sweet sound over and over again. Hey Leo, I suggest you sign up as a sponsored vendor. This thing will sell itself.
ViolinNew Jersey · Nov 16, 2006#14AEM put their dyno results right on the instructions.
RossPPaphos, Cyprus · Nov 17, 2006#15Leo
Sorry for Hijacking the thread but I have tried several times contacting your company this year about selling your products in Cyprus. I have sent 2 Fax & 3 emails, but not received any replies. I look forward to hearing from you soon. Please contact me on
ross.pedersen@rpautosports.com KatanaUnder the hood! · Nov 17, 2006#16 Originally Posted by Galavoxx
I drove it back from South San Francisco over McClaren Park. The intake makes a very nice difference over stock. I didn't think I would really feel that much extra power considering intake mods I've done on previous cars. The low end really feels stronger and the motor pulls better and revs faster and smoother all the way to red line. Plus the sound around 4000 and up is oh so sweet. Now I know what all you guys with the CAIs have been talking about. I can already see my gas mileage headed to the toilet based on wanting to hear that sweet sound over and over again. Hey Leo, I suggest you sign up as a sponsored vendor. This thing will sell itself.
+1 from me!
CASTREXCosta Rica · Nov 17, 2006#17Hey Leo do you already have a price for the intake???
How fast can I get it?
If is priced below AEM's CAI I would definitively buy one.
dngzvancouver · Nov 17, 2006#18yea how much?
ItsMyDailyLos Angeles, CA · Nov 17, 2006#19it's a good price
dngzvancouver · Nov 17, 2006#20how much is a good price?
spkrman2 · Nov 17, 2006#21 Originally Posted by dngz
how much is a good price?
x2, very interested 😎
looks like it shoudl be of the cheaper offered due to the simplicity?
ViolinNew Jersey · Nov 17, 2006#22The dyno numbers are very impressive. I wish this had been available before I got the AEM CAI.
I do have a question though.
Isn't the idea behind a cold air intake to avoid using heated engine compartment air? How accurate are the results if the hood was kept open during the dyno run on this baby?
ItsMyDailyLos Angeles, CA · Nov 17, 2006#23 Originally Posted by Violin
The dyno numbers are very impressive. I wish this had been available before I got the AEM CAI.
I do have a question though.
Isn't the idea behind a cold air intake to avoid using heated engine compartment air? How accurate are the results if the hood was kept open during the dyno run on this baby?
Fairly accurate I'd say considering this engine bay does not get to hot anyway when driving. The engine compartment gets a lot of cold air into it during travel, so I'd guess air is actually cooler in under the hood while driving rather then just having the hood open. Now if someone that gets it can incorporate some kind of box with some kind of snorkel then that be even better.
Sorry guys I'll just let the manufacturare let you in on the price, but I will say it's around the same as the aem cold airs. considering the difference in results I'd say it's a lot more worth it though.
KatanaUnder the hood! · Nov 18, 2006#24+1.Well said.
WRLEOThread starterSan Francisco · Nov 23, 2006#25Special for the holidays we have decided to give the ram air kit with the intake systems ordered only up till end of december. anyone intrested in the intake PM me. and we can work out the details.
ItsMyDailyLos Angeles, CA · Nov 23, 2006#26 Originally Posted by WRLEO
Special for the holidays we have decided to give the ram air kit with the intake systems ordered only up till end of december. anyone intrested in the intake PM me. and we can work out the details.
Oh I did not realize this was the deal you mentioned to me. Then I am interested, but would you have a picture of the items(does not have to be on the car) for reference?
dngzvancouver · Nov 23, 2006#27WRLEO!! check your paypal!!!
dngzvancouver · Nov 23, 2006#28sure thing!! i cant wait to get my headers after cuz once i get em im gonna get my custom exhaust installed with it!!
07WYarisRSRidgeway Ontario · Nov 24, 2006#29I would be more impressed if I saw actual gains before 4500 rpm
dngzvancouver · Nov 24, 2006#30umm... wrleo?? ive sent money to you but still havent got any word back.. please email me or pm me.
WRLEOThread starterSan Francisco · Nov 24, 2006#31i know you canadians dont have thanks giving, but we do.. ahaha
It will be shipped out on monday or tuesday.👍
ism3tSouthern California · Nov 24, 2006#32payment sent! cant wait for the loooowwww rumble
dngzvancouver · Nov 24, 2006#33OOOOOH YEA! THANKSGIVING! lol!! we had ours already! think you can ship it on... monday?? =) =) =)???
haha ya baby! who else bought 1 besides me and ISM3T??
ISM3T did you pay the MR Headers GB Yet??!!!!
riceboyCAN · Nov 24, 2006#34Where are all the Black Friday deals????? no door crashers....
ism3tSouthern California · Nov 24, 2006#35yeah i sent the payment for both
CASTREXCosta Rica · Nov 25, 2006#36It happens that I came to San Francisco for the thanks giving.... So I contact Leo from WR and he was knd enough to give me my Intake this afternoon...! Looks sweet.
Don't askme anything about the performance... cause I won't be installing it untill a few weeks from now...
But one thing I can tell you: Leo is the coolest guy! He took me around the shop and showme a lot of the WR's stuff, new parts and dyno test comparisons from several cars... Did I mention new parts?? They are cooking a rear strut bar for the Yar...
WR for sure does it's homework... great quality parts, supported by solid R&D (dyno testing).
Bad news regarding the new headers... The shop is packed with lots of work... so Leo doesn't think it will be ready for another month or two.
Maybe if they see more interest on the header (demand)... they will speed up the production... So keep PM Leo. It's all about the $$$
Not to cause any trouble, but I think that all the guys in the GB for the Megan Racing header, should have waited I little more. Leo show the prototype and some preliminary numbers and I can tell you that really worth the extra $$$
YamilRSan Diego, CA · Nov 25, 2006#37 Originally Posted by CASTREX
It happens that I came to San Francisco for the thanks giving.... So I contact Leo from WR and he was knd enough to give me my Intake this afternoon...! Looks sweet.
Don't askme anything about the performance... cause I won't be installing it untill a few weeks from now...
But one thing I can tell you: Leo is the coolest guy! He took me around the shop and showme a lot of the WR's stuff, new parts and dyno test comparisons from several cars... Did I mention new parts?? They are cooking a rear strut bar for the Yar...
WR for sure does it's homework... great quality parts, supported by solid R&D (dyno testing).
Bad news regarding the new headers... The shop is packed with lots of work... so Leo doesn't think it will be ready for another month or two.
Maybe if they see more interest on the header (demand)... they will speed up the production... So keep PM Leo. It's all about the $$$
Not to cause any trouble, but I think that all the guys in the GB for the Megan Racing header, should have waited I little more. Leo show the prototype and some preliminary numbers and I can tell you that really worth the extra $$$
How about a picture?
spkrman2 · Nov 25, 2006#38quality stuff at a reasonable price is what its all about :)
ItsMyDailyLos Angeles, CA · Nov 25, 2006#39any pictures of the intake set-up with the ram air?
CASTREXCosta Rica · Nov 25, 2006#40I won't install the intake untill a few weeks... My car is in Costa Rica... and I will be back to my country in a few weeks.
I will un packed the intake and show you a picture...
YamilRSan Diego, CA · Nov 25, 2006#41 Originally Posted by CASTREX
I won't install the intake untill a few weeks... My car is in Costa Rica... and I will be back to my country in a few weeks.
I will un packed the intake and show you a picture...
Gracias!!
ItsMyDailyLos Angeles, CA · Nov 25, 2006#42^^ thank you.
dngzvancouver · Nov 25, 2006#43hehe ya, too bad i was already committed to the MR Headers.
CASTREXCosta Rica · Nov 26, 2006#44Pictures attached. (Not installed yet)
2 attachments not included in this copy
dngzvancouver · Nov 26, 2006#45AWESOME! Cant wait to get mine!
YamilRSan Diego, CA · Nov 26, 2006#46I would like to know if possible how this Intake compares to AEM or TRD
ItsMyDailyLos Angeles, CA · Nov 26, 2006#47 Originally Posted by CASTREX
Pictures attached. (Not installed yet)
thank you for the pic. Looks like you put te same pic up twice. Is that everything included with the kit?
YamilRSan Diego, CA · Nov 26, 2006#48 Originally Posted by ItsMyDaily
thank you for the pic. Looks like you put te same pic up twice. Is that everything included with the kit?
That's all it needs👍
CASTREXCosta Rica · Nov 26, 2006#49yeap, that's all. plus a cleaning kit for the element.
CASTREXCosta Rica · Nov 26, 2006#50Ups sorry!! you're right... I posted the same picture twice. Here's the picture of the complete set up
1 attachment not included in this copy