Russelt3hPirateOriginal postEpcot · Nov 10, 2006#1Is any one prepped (properly) for SCCA Solo2 Autox Class FSP?
My good friend is running his xA in FSP and doing very well.
Obviously there isn't much to be had with power, but Intake and Exhaust will help.
so I'm looking at the following
Wheels
R-comps
Springs
Struts (adjustable)
Strut Tower Bars
Anti Sway Bars
looking for Ideas, opinions, specific brands/parts ect.
I currently Autox a BSP Prepped STi, and my girlfried will be campaigning the yaris. :)
Replies 72
eclip5eBoston, MA · Nov 10, 2006#2Are you sure you want to do FSP and not STS?
KatanaUnder the hood! · Nov 10, 2006#3What's that event?
Russelt3hPirateThread starterEpcot · Nov 10, 2006#4 Originally Posted by eclip5e
Are you sure you want to do FSP and not STS?
yes, after running V710s on my STi I refuse to autox on street rubber ever again.
and this is only locally, not national. I doubt the Yaris would be competitive nationally in FSP.
are you the eclip5e on Nasioc? if so I'm WRX8XB on nasioc ;)
Russelt3hPirateThread starterEpcot · Nov 10, 2006#5Chris07LBNew Jersey · Nov 10, 2006#6 Originally Posted by Russelt3hPirate
Damn that looks like some fun! 👍
Russelt3hPirateThread starterEpcot · Nov 10, 2006#7 Originally Posted by Chris07LB
Damn that looks like some fun! 👍
it's addiciting.
I can't wait to have the Yaris prepped for FSP and beating up on some Datsun 510s :)
Chris07LBNew Jersey · Nov 10, 2006#8 Originally Posted by Russelt3hPirate
it's addiciting.
I can't wait to have the Yaris prepped for FSP and beating up on some Datsun 510s :)
Is there a way to find out where events are held in New Jersey?
Russelt3hPirateThread starterEpcot · Nov 10, 2006#9I can ask some of the NJ subaru guys.
kngrsllSpartanburg, SC · Nov 11, 2006#10ill autox mine sometime. i havent decided on a set up yet, i think im gonna wait for koni to release something, but if not, ill probably just get the TRD shocks and springs, an intake and exaust, and some sticky street rubber and run STS for a bit. if i really get the bug again (i ran DSP in a 240, won the class and took second in 3 years) ill throw some sticky rubber on it and get some more mods. my heart is really in track racing so i'll probably stick to that mostly. they are two very different beasts but with a light set up, ill be able to run both comfortably, but probably not be too competitve in autox. you really need to hone a good set up to be fast, even if you have good skill.
Russelt3hPirateThread starterEpcot · Nov 11, 2006#11I believe properly prepped the Yaris could do well in FSP.
I don't think it'd do very well in STS against the old Civic Hatchbacks.
kngrsllSpartanburg, SC · Nov 11, 2006#12yeah, your right, but im not gonna set this car up for a class like i did the 240. i probably will do what i listed before: springs, shocks, exhaust, and an intake. i may do a few other small things (brake pads and the like) but not much more. i would get a rear sway bar if someone makes it, and another set of wheels with some R compounds if i start tracking it. then, if i do go to an autox, ill run it in street prepared. man, a full tilt set up though would be preeetty sweet! i'd love to see someone do it! its all about your goals and how you are going to use your car. it's nice to do taht before buying anything so you dont waste your money. i want to keep the car very streetable, but push it toward the sporty side, lol. when i finish school, ill buy a sports car (or a kart) for my hardcore racing, but i just wanna keep this my daily driver. what is nice about setting up your car for an autox class is that it keeps the car fairly balanced and limits what you can buy so you don't blow your budget!
kngrsllSpartanburg, SC · Nov 11, 2006#13oh yea, i forgot, so your planning on fitting your car to the street prepared rule class then? i would look into a diff, that would help alot. i know cusco makes one and its available now. while your at it, you should change the clutch and flywheel while the tranny is off. as for suspension, cusco again makes some things, but id wait to see if koni is going to make anything for it. then get some wheels, R-compounds, and it'll be 3 wheeling all day, lol...
Russelt3hPirateThread starterEpcot · Nov 11, 2006#14As much as I'm against planning before the car is in the driveway, I've already partially planned out the car.
I doubt the car will get a diff put in it until later in it's life.
The beauty of FSP is the restrictions, but I plan on keeping the stock steering wheel and seats simply b/c it is a daily driver and not a track car like my STi.
Of course Pads, rotors, lines, all the fun consumables will be upgraded.
I have a feeling there wont be alot of autox nuts in this camp but the few of us that will be, will be kicking some ass! :)
Not sure this will be prepped for anything but Autox, it's a little short on power for the track.
kngrsllSpartanburg, SC · Nov 11, 2006#15yeah, that certainly true... any track time will be strictly about maintaining momentum, lol! you know, it actually takes alot more skill to pilot a car around with low power b/c it forces you to really watch your braking points and apex's rather than using brute force to wring the car around. its fun though... Russell, look for a thread about tracking the yaris, there is a guy who has already done it. he had some r compounds, springs, and an exhaust, thats it. he did really well and took pics.
anyways, it sounds like your already on the right path... even if its not just an autox car, sticking to SP is nice for simply the restrictions of it. keep us updated on anything you do to the yaris and any racing that happens and ill do the same.
and give us some info on the STi!!
Russelt3hPirateThread starterEpcot · Nov 12, 2006#16 Originally Posted by kngrsll
yeah, that certainly true... any track time will be strictly about maintaining momentum, lol! you know, it actually takes alot more skill to pilot a car around with low power b/c it forces you to really watch your braking points and apex's rather than using brute force to wring the car around. its fun though... Russell, look for a thread about tracking the yaris, there is a guy who has already done it. he had some r compounds, springs, and an exhaust, thats it. he did really well and took pics.
anyways, it sounds like your already on the right path... even if its not just an autox car, sticking to SP is nice for simply the restrictions of it. keep us updated on anything you do to the yaris and any racing that happens and ill do the same.
and give us some info on the STi!!
yea the brakes are useless! haha (on the yaris, as in there is no point in using them you're not going fast enough to out drive the R-comps :) ).
I'll start a thread in the gallery of my STi.
eclip5eBoston, MA · Nov 12, 2006#17 Originally Posted by Russelt3hPirate
yes, after running V710s on my STi I refuse to autox on street rubber ever again.
and this is only locally, not national. I doubt the Yaris would be competitive nationally in FSP.
are you the eclip5e on Nasioc? if so I'm WRX8XB on nasioc ;)
that would be me!
Russelt3hPirateThread starterEpcot · Nov 12, 2006#18 Originally Posted by eclip5e
that would be me!
haha, awesome! what are you doing here?
eclip5eBoston, MA · Nov 13, 2006#19 Originally Posted by Russelt3hPirate
haha, awesome! what are you doing here?
Trying to convince Yaris drivers that the platform is a solid contender as a race platform in the <2.0l engine demographic.
Russelt3hPirateThread starterEpcot · Nov 13, 2006#20 Originally Posted by eclip5e
Trying to convince Yaris drivers that the platform is a solid contender as a race platform in the <2.0l engine demographic.
sweet me too! too bad they aren't 5x114.3 or we could test some 17x10's and 275s :)
eTiMaGoBangkok, Thailand · Nov 14, 2006#21how in the world would 10" wheels fit on a yaris??? 😁 And with such a light car, would there be enough weight on the wheels to maintain a good grip?
03Z33SoCal · Nov 14, 2006#22It's doable with some pulling of the fenders, or an overfender... but I'm not sure they are needed 😆
For autocross duty, I'd be all over a set of 13x9 Watanabes or Panasports with some sticky Avons or Hoosier A3S06's!
eTiMaGoBangkok, Thailand · Nov 14, 2006#23Hmm yeah with a wide body kit it could be physically done.
But what I am worried about is the downside of using really wide wheels? Isn't there a point at which the weight of the car is just not enough to ensure maximum grip on the tires?
the_saintOmaha, somewhere in middle america · Nov 14, 2006#24Depending on the offset you might not need a widebody kit. I have seen a 9" wide wheel on a stock fendered Yaris/Vitz.
eclip5eBoston, MA · Nov 14, 2006#25 Originally Posted by eTiMaGo
Hmm yeah with a wide body kit it could be physically done.
But what I am worried about is the downside of using really wide wheels? Isn't there a point at which the weight of the car is just not enough to ensure maximum grip on the tires?
Any non-spec size wheel will accelerate the speed at which your wheel bearings are worn, especially non-spec offset.
As for power/weight ratios, this could be a problem, but more importantly, there is a point where adding wheel/tire width no longer adds to grip levels, and only adds weight.
Russelt3hPirateThread starterEpcot · Nov 14, 2006#26i was joking about the 10" wheels.
contact patch doesn't increase with tire width or wheel width, it's dependent on vehicle weight.
lateral grip will increase b/c the contact patch is now "wider" but the contact patch area isn't larger.
I dont think it'd make much sense to have more than an 8" wheel but i'm pretty sure a 15x7 will do the car plenty justice :)
the_saintOmaha, somewhere in middle america · Nov 14, 2006#27I'm not trying to argue anything about "wider is better"...but wouldn't a wider tire=larger contact patch area? I mean from a purely mathematical stand point.
Russelt3hPirateThread starterEpcot · Nov 14, 2006#28 Originally Posted by the_saint
I'm not trying to argue anything about "wider is better"...but wouldn't a wider tire=larger contact patch area? I mean from a purely mathematical stand point.
nope, contact pacth area is dependent on weight
contact patch shape is dependent on wheel and tire width
03Z33SoCal · Nov 15, 2006#29I'm just going by what I see at the higher levels of "cone dodging" (autocross). You normally see the faster cars running aggressive wide tires, with very sticky compounds (slicks or DOT R's like A3S06, etc..)
There is a balance you need to achieve between the wheel width, tire width, and weight of the car. Most times, a narrower stickier tire will yield superior results to a wider tire that isn't making good use of its full contact area (and additional weight). The best way to find these things out is to go out with a tire pyrometer or some chalk and try out different setups, pressures, etc...
Russelt3hPirateThread starterEpcot · Nov 15, 2006#30 Originally Posted by 03Z33
Most times, a narrower stickier tire will yield superior results to a wider tire that isn't making good use of its full contact area (and additional weight).
now, i understand you like narrow tires ;)
anyway I know from personal experience that a 275 on an 8" wheel is faster around an autox couse than a 245 on an 8" wheel. (same rolling diameter too btw).
when limited by wheel size it is most beneficial to run the widest tire possible simply for the lateral grip
when limited by rubbing or fenders or anything else, it is beneficial to run the widest tire possible simply for the lateral grip
turn in and some response is sacrificed but the increase in lateral grip is worth it when you're looking at the times at the end of the day.
I plan on having a set of 15x7s for autox with some 225s, which is similar to what my buddy runs on his xA. Might actually just steal his wheels for a day. ;)
The Yaris will be a fun toy, i'm excited :)
03Z33SoCal · Nov 15, 2006#31See, I totally agree with the above and have first hand experience to back it up. 🙂
I ran stock size 245/40/18 tires (Yokohama AVS Sport) on the stock 350Z wheels which are 18x8 for a few track events. Then I came up on some chep AVS Sports in 275/35/18 (almost same OD, just wider) and they looked pretty funny bulged out on a 8" rim but they worked suprisingly well! My tire guys hated having to mount these even more then some of my strethed tires 🙂
I should have my 16x8's mounted today or tomorrow, I'll report back on the fittment. I really think 13-15" would be best for autocross, anywhere form 7-9" wide should fit (depending on offset and tire size) and you may benefit from narrower to save some weight.
Russelt3hPirateThread starterEpcot · Nov 15, 2006#32what wheels are you getting? offset?
03Z33SoCal · Nov 15, 2006#33This set is just for looks 😉 16x8 +15 rear and +25 front (deep dish)
Russelt3hPirateThread starterEpcot · Nov 15, 2006#34 Originally Posted by 03Z33
This set is just for looks 😉 16x8 +15 rear and +25 front (deep dish)
and 185s :(
is there a reason you're increasing your rear track greater than the front?
have you looked into the adverse effects of changing the vehicles scrub radius? especially on a FWD car.
my friend has some 15x7 +22mm Team Dynamics that we will be testing out.
the_saintOmaha, somewhere in middle america · Nov 15, 2006#35 Originally Posted by Russelt3hPirate
....is there a reason you're increasing your rear track greater than the rear?
have you looked into the adverse effects of changing the vehicles scrub radius? especially on a FWD car.
Originally Posted by 03Z33
This set is just for looks 😉 16x8 +15 rear and +25 front (deep dish)
one character
Russelt3hPirateThread starterEpcot · Nov 15, 2006#36 Originally Posted by the_saint
one character
??
the_saintOmaha, somewhere in middle america · Nov 15, 2006#37You need at least one character to make a new post...and quotes don't count.
Russelt3hPirateThread starterEpcot · Nov 15, 2006#38 Originally Posted by the_saint
You need at least one character to make a new post...and quotes don't count.
I was asking what point you were making.
I can read, I know what he said, i know what i said.
but what point are you trying to make?
the_saintOmaha, somewhere in middle america · Nov 15, 2006#39He clearly stated that he was doing it for looks. To which you reply with a question about why he want's to increase the rear track....wait a minute...you asked him why he wants to increase his rear track greater than the rear. What are you asking?
at any rate, he's doing it for looks. If he wants to run a 10" wheel with 0 offset, so be it. He's doing it for looks.
Not everybody wants to be a Johnny-go-go-speedracer.
Russelt3hPirateThread starterEpcot · Nov 15, 2006#40 Originally Posted by the_saint
He clearly stated that he was doing it for looks. To which you reply with a question about why he want's to increase the rear track....wait a minute...you asked him why he wants to increase his rear track greater than the rear. What are you asking?
at any rate, he's doing it for looks. If he wants to run a 10" wheel with 0 offset, so be it. He's doing it for looks.
Not everybody wants to be a Johnny-go-go-speedracer.
you sound hostile.
it was a simple question, who cares if it is just for looks, you still want it to drive straight, and i'm pretty sure he'll go full throttle from time to time, and take a couple corners above the posted reccomeneded speed.
and yes it was a typo on my part, I was asking why he was increase the rear track greater than he was increasing the front. I'll edit the original post, so not to confuse anyone further.
the_saintOmaha, somewhere in middle america · Nov 15, 2006#41Nope, no hostility.
I guess my point out of the whole deal is that it sounds like it's purely asthetical and he probably is not concerened with performance.
Russelt3hPirateThread starterEpcot · Nov 15, 2006#42 Originally Posted by the_saint
Nope, no hostility.
I guess my point out of the whole deal is that it sounds like it's purely asthetical and he probably is not concerened with performance.
even aesthetically pleasing mods shouldn't have adverse effects. at least IMHO.
kngrsllSpartanburg, SC · Nov 15, 2006#43 Originally Posted by Russelt3hPirate
even aesthetically pleasing mods shouldn't have adverse effects. at least IMHO.
i agree with that. anyone see the sport compact car article with the two 350Z's on the cover? one was done by a guy with track events in mind and the other was a w00t street racer guy and had all the name brand bling on his. well the thought out sorted track car just destroyed the other.
03Z33SoCal · Nov 16, 2006#44 Originally Posted by kngrsll
i agree with that. anyone see the sport compact car article with the two 350Z's on the cover? one was done by a guy with track events in mind and the other was a w00t street racer guy and had all the name brand bling on his. well the thought out sorted track car just destroyed the other.
I never read the article, but I was at the track that day and those cars where both crap! I know the owner of the "FI" car which also happened to have crap aligment, 400 lbs. of stero stuff, and crap tires IIRC. Those guys are the most useless magazine writers, and I can only imagine how crappy that article reads. We where at Horse Thief that day (right above the streets course) and we had 4 Z's at the event (including mine). My Z is mostly my track toy at this point, I rarely drive it on the street, but I still like to run stylish wheels, which includes running wheels with negative offset, huge lips and stretched tires. I haven't found any downsides to running these on the car so far, I'm sure the wheel bearings may wear early, but I change those once a year anyway as preventative maintenance. I actually really like the feel of the wider track, it gives the car a lot more stability.
Regarding your autocross setup, I wouldn't recommend the 15x7 +22's they'll stick out too far and you won't be able to run a decent sized tire. You want to try and stay in the +30 or higher offset range if you plan to run a 205 or wider tire without major rubbing. My track wheels right now are 15x7 +35 and they fit nice and flush with 195/55/15 Bridgestone RE55S (r-compounds) this tire is know to run wide, and I also increased my front camber to max (-2 deg) by purchasing the thinnest camber bolts from Toyota (12.4mm vs. 15mm stock) for both mounting holes, and set the strut to max neg. camber on both sides. Toe is set at 0.
I have more than 5 sets of wheels for the Yaris already, I like trying out different setups, and the style wheels are just that, for style. The look I'm after is a deep dish, and to achieve that it's necessary to go with a lower offset. I didn't want to compromise the front too much, so I stayed with a somewhat conservative offset and ~3" lip. On the rear I'll have almost 4" lip and peformance shouldn't be adversely affected noticably, but I'll make sure to give my honest oppinion if I find out otherwise.
kngrsllSpartanburg, SC · Nov 16, 2006#45i think im going to get a set of 16x7's and run a 205/50/16 azenis on it. ill pick up a set of 15's with R compounds for track when i start going. at least there are alot of choices when it comes to that size tire.
Russelt3hPirateThread starterEpcot · Nov 17, 2006#46the only reason i have no issue trying the +22mm's is they will be free to use/borrow for a test run.
last thing i would do is buy wheels w/o testing something as a gauge.
Russelt3hPirateThread starterEpcot · Nov 27, 2006#47well, drove home the new yaris yesterday.
tests fits should start soon, prepping shortly there after.
anyone know of seatbrackets for the yaris/vitz?
the_saintOmaha, somewhere in middle america · Nov 27, 2006#48 Originally Posted by Russelt3hPirate
anyone know of seatbrackets for the yaris/vitz?
TRD bracketsDon't know where to get them, but at least it gives a part#
Russelt3hPirateThread starterEpcot · Nov 27, 2006#49I'll have no issue sourcing JDM Toyota parts, thank you for the part #!!
now just to find out if recaros will bolt to them :)
platypusMt. View, CA · Nov 27, 2006#50 Originally Posted by Russelt3hPirate
I'll have no issue sourcing JDM Toyota parts, thank you for the part #!!
now just to find out if recaros will bolt to them :)
keep us posted. better/stickier tires and better seating are the two mods high on my list.