jeongOriginal postNorCal · Nov 7, 2006#1Hello Happy Yaris owners.
I just goy my Blazing Blue Yaris LB last Friday. What a fun car. :)
I do have a question... I have a iPod Mini and connected it via AUX port using a mini stereo cable. For some reason, the sound output of the iPod through the speakers are much lower than the sound I get from the FM stations.
For example, when I listen to radio at volume setting 20, I would have to turn the volume to 35-40 to listen to the iPod.
Is anyone else experiencing this? Is there a work around? Do I need a differrent mini stereo cable?
Thank you for your kind response. :)
Replies 9
TrancosRtS Florida · Nov 7, 2006#2My creative mp3 player needs to be cranked up all the way, but then 20 does the trick, although 25 is right about perfect.
nick1983Winnipeg Manitoba · Nov 7, 2006#3Turn up the IPOD
jeongThread starterNorCal · Nov 7, 2006#4Thanks for the respones. :)
vodkalushRochester, NY · Nov 7, 2006#5another factor is the level that the song was recorded/ripped at.
Another factor is probably that the headphone jack on the iPod isn't impedance-matched to the line-level input of the radio's AUX port. You could try plugging your iPod in to the iPod dock, which actually has a proper line-level output that should be proper impedance and level for the radio's AUX port.
I have the same problem with my iPod, but I don't know where I'd position the iPod in the dock in my sedan. It's possible that someone makes just a cable that plugs into the dock connector that provides a line out jack that would be less bulky than having to use the dock.
jeongThread starterNorCal · Nov 8, 2006#8Thanks for all the tips. I wil see what I can do. :)
SinazLos Angeles · May 30, 2007#9Actually, I use an iRiver (but let's just say a non-iPod) that I plug directly into the aux port. I have a similar problem. At maximum mp3 player volume, I still have to crank my stereo up to 50+ to get nominal listening volume (this applies to all mp3 content, though songs play just slightly louder than podcasts).
The big issue is that I get in the habit of having the stereo volume cranked while listening to the mp3 player, and then plugging in/out the cable causes a loud pop in the system that I just know will eventually do something bad to the speakers.
Can I do something about the impedance matching?
jamal1984Georgia, USA · May 30, 2007#10My got the same problems, try to buy some expensive cable but still the same, it's wont get near the CD quality.