would this work for a yaris or am i better of just getting a yaris short shifterhttp://www.trdparts4u.com/PD-PTR04-5....aspx?MakeID=1
quick shifter
29 posts · 12,297 views
Replies 28
Looks a little different... excuse the blurry picture, camera phone.
Picture not included in this copy
My buddy actually just hacked a center section out of my stock shifter with an air saw and welded the pieces back together at an angle. My short shifter cost me a 12 pack... haha.
Picture not included in this copy
My buddy actually just hacked a center section out of my stock shifter with an air saw and welded the pieces back together at an angle. My short shifter cost me a 12 pack... haha.
1 attachment not included in this copy
That TRD one is interesting, looks like the whole plastic assembly is changed, not just the rod like the TWM one or ChinoCharles' amazing high-tech shifter 😁
Someone should get that TRD one and compare it to the stock assembly 😉
Someone should get that TRD one and compare it to the stock assembly 😉
The TRD one is a whole assembly. No cutting, no bodgy work needed. It maintains the height which I prefer and comes with the boot and knob.
umm that ain't a short shifter, the purpose of a short throw shifter is to reduce the amount the shifter has to travel to shift gears, the pivot points are relocated in a "real short shifter", which requires less travel distance.Originally Posted by ChinoCharlesLooks a little different... excuse the blurry picture, camera phone.
Attachment 2089
My buddy actually just hacked a center section out of my stock shifter with an air saw and welded the pieces back together at an angle. My short shifter cost me a 12 pack... haha.
The throw is shorter.
I would rather keep the stock height.... dropping it will make it way too low... at least for me....
Well I would like to reduce the distance between gear changing.
That may be true, but simply shortening the length of the shifter does create a shorter distance of travel at the shift knob's highest point (which is where you are grabbing the shifter).Originally Posted by punchumm that ain't a short shifter, the purpose of a short throw shifter is to reduce the amount the shifter has to travel to shift gears, the pivot points are relocated in a "real short shifter", which requires less travel distance.
Think of it like two lines coming to a point - the point being the base of the shifter. if the two lines are longer, there is a greater distance between the end points that are opposite to the shared point. shorten the lines, shorten the distance.
I think the point of a SS is reduce the throw, BUT maintain height and the force necessary to move the lever between gears. By cutting the rod will reduce the throw but increase the effort needed to move between gears.
1 attachment not included in this copy
I want that boot... where did you get it?
That makes total sense - with a lowered shift knob you'll end up with a bad back!Originally Posted by SmellyTofuI think the point of a SS is reduce the throw, BUT maintain height and the force necessary to move the lever between gears. By cutting the rod will reduce the throw but increase the effort needed to move between gears.
Its true... the amount of force necessary to shift is still the same. Will a shifter bushing kit from TWM help with that? Or the C-ONE clutch line?
Comes with the TRD SS kit.Originally Posted by ChinoCharlesI want that boot... where did you get it?
pricing???
in a sports car they keep the shifter height wise low and sorry but this is just an everyday car and the way you sit in the car it would just work better if you just had a short throw not just a short shift rod deal thing
Thank you echo_hrs! I got it now... I was kind of confused when I saw the TRD shifter on the web because it had the whole cage, while TWM's shifter online looked like just a . Basically, we (monster garaged, ghetto rigged... whatever you want to call it) TWM's product. When it snaps in two I'll post about it, don't worry.Originally Posted by echo_hrsMetal bushings will make the shifts more postive, stiffer and easier to get into gear, rather than the rubbery stock feeling...
The TRD Quickshift includes the bushings...
The TRD is a true "quick" shifter, it changes the fulcrum: the angle at which the lever engages the gears, making throws shorter and more direct, while maintaining the stock height, and not requiring more effort to shift into gear...The TRD also includes the entire assy so that you don't have to cannibalize your stock shifter...
The TWM also changes the fulcrum to allow shorter throws, but also shortens the shifter length, which has no bearing on the shortness of throws...A shorter shaft will increase the effort required to shift the car into gear as well...The TWM is only the lever and not the cage...+ bushings seperately...
Ultimately, they are both quality pieces of kit, it really depends on what you are looking for with your swap...
If my shifter was any shorter I'd have to lean forward to shift the car which is pointless...
Cheers
I'll be buying the bushings from TWM soon.
Here's a link to the one on the TRD site:
http://www.trdparts.jp/english/parts_quickshift.html
I believe it's the same as the old Vitz/Echo (NCP10) even though it doesn't say so on that link above... can anyone confirm?
I like having my shifter sit real high... so I don't have to reach at all from my seat. I added a tall bubble shift knob (8" tall) and it feels great, only issue is the throw is a bit long now and the shifter isn't weighted so it took a little getting used to. I think this knob with the TRD assembly would be a perfect match for me.
http://www.trdparts.jp/english/parts_quickshift.html
I believe it's the same as the old Vitz/Echo (NCP10) even though it doesn't say so on that link above... can anyone confirm?
I like having my shifter sit real high... so I don't have to reach at all from my seat. I added a tall bubble shift knob (8" tall) and it feels great, only issue is the throw is a bit long now and the shifter isn't weighted so it took a little getting used to. I think this knob with the TRD assembly would be a perfect match for me.
It would not be the same gearshift as the NCP1x to NCP9x. From my experience, the NCP1x is much shorter and much more notchy.
i have the TWM short shifter, and regarding the height... there is only roughly a 2 inch drop or so. Overall the shifter is awesome, just not too much a difference in hieght. That TRD is pretty nifty if i may say so.
smelly tofu got the part #???
You might find that the my SS is for RHD (if you notice the clutch pedal in the picture) and most likely the gear lever not leaning to the left. You are better off finding something from TRD USA rather than TRD Japan.
Part number is here anyway if you need it...
http://www.trdparts.jp/parts_quickshift.html
Picture not included in this copy
33530-NP900
http://www.trdparts.jp/parts_quickshift.html
Picture not included in this copy
33530-NP900
so no compatibility???? damn it.... it looks sweet, and i'm sure will add that much more fun to the car...
You can try... at your cost.
lol.. yeah except I don't want a pointless mod....
I can look up the stock North American shifter assembly part number today. Can anyone help us find out the stock Japanese spec part number?
I think smelly tofu already provided it...
33530-NP900
33530-NP900
That's the TRD part # which won't match up with the OEM stock part #. We would need the stock JDM shifter part # to check and see if it might be the same as the North American spec part.