Yarisworld Archive

quick window tinting question...??

9 posts · 8,775 views

static808Original postCalifornia · Oct 15, 2006#1
greetings everyone:

i was wondering whether the door panels had to be removed for a window tinting process?? im assuming the rear windows and rear windshield are a direct application, but are the front door panels removed in order to perform the tinting process for the front windows? i am just worred about the introduction of rattling noises and/or poor re-installation of panels/covers on the front doors. any experiences with your window tints would be greatly appreciated, since we have never gotten the windows tinted on any of our previous vehicles. THANKS!

--B

Replies 8

IsLNdbOiLas Vegas, NV · Oct 15, 2006#2
No, no panels have to be removed.
KatanaUnder the hood! · Oct 15, 2006#3
No.You just stick on the windows the tints.
ViolinNew Jersey · Oct 15, 2006#4
The guy who did mine removed the door panels so they wouldn't get streaked from all the water they spray on during the install. It was a perfect job.
ChinoCharlesOH · Oct 15, 2006#5
It isn't necessary.
static808Thread starterCalifornia · Oct 15, 2006#6
thanx for the responses everyone! we'll be sure to check our options on the panels with the installer, and just make sure to go to a reputable one.

--B
Waysidenew york · Oct 15, 2006#7
The tint needs to be applied under the door rubbers.
The three choices are:
Pushing the rubbers down (they don't always pop back up)
Taking the door panels off (if step one fails you will have to do this anyway)
Use a tinting tool that holds the rubbers back so you can squeegee the tint past the rubbers.
static808Thread starterCalifornia · Oct 15, 2006#8
i'm sorry, but we were wondering if anyone from the socal area actually recommends a place to get our tint done?? we definitely want to avoid bad installs and/or purpling AND bubbling in the future. thanks a bunch everyone!

--B
Chris07LBNew Jersey · Oct 16, 2006#9
Not needed, but for how simple it is to remove, it will make for a better/cleaner install.