Yarisworld Archive

My damping project

19 posts · 6,850 views

Replies 18

hasher22Australia Sydney · Oct 9, 2006#2
Thats CRAZY!!!!! did u install it yourself?

Cuz i dynamated my car doors and they were a bitch to do, let alone the trunk........

Good job
johnnyfiveMilwaukee WI · Oct 9, 2006#3
well, the trunk will be much easier than the doors :)

and i second the seccond skin product line. it really is a step above alot of the other sound dampening products http://www.sounddeadenershowdown.com
LowfrontThread starterWorcester MA · Oct 10, 2006#4
No, the trunk is a lot harder then the doors. The doors you can confortably kneel to do, the trunk you need to constantly be in a horrible position, Proberly took me 5 hours total to do the trunk. The trunk has far more material to put down, and where the wheel goes, that area is a bitch to do.

Yes I did it myslef, between the doors and the trunk proberly took me 8 hours.
xfatefailsx07New York, USA · Oct 10, 2006#5
So did it take 5 or 8 hours to do the trunk? Your post is misleading..😛
vodkalushRochester, NY · Oct 10, 2006#6
Originally Posted by Lowfront
....

Yes I did it myslef, between the doors and the trunk proberly took me 8 hours.
Doors = 3hrs
Trunk = 5hrs

👍
xfatefailsx07New York, USA · Oct 10, 2006#7
i withdraw my attempt at criticism..i will now retreat back into my hole, and not speak again.. haha thanks for pointing it out vodka..
punchBarrie, ontario · Oct 10, 2006#8
yikes, how much weight did it add?
LowfrontThread starterWorcester MA · Oct 10, 2006#9
A good 40 pounds between the doors and trunk


Yes there was a bit of a performance drop
grimezAmes, Iowa · Oct 10, 2006#10
Ugh, I wanted to add sound dampening, but not if its going to hurt my performance...
hasher22Australia Sydney · Oct 10, 2006#11
Originally Posted by grimez
Ugh, I wanted to add sound dampening, but not if its going to hurt my performance...
take out ur spare tyre then, and damp it, that should equal the amount of weight taken off and added on.
johnnyfiveMilwaukee WI · Oct 10, 2006#12
i just dont like reaching into door skins, would rather lay on my back, and do a trunk :)
LowfrontThread starterWorcester MA · Oct 11, 2006#13
Ya thats a pain, the biggest thing for me is all the cuts you get. My hands have sooo many cuts on it from the material. It takes awhile to heal these damn things because me hands get dirty at work.



grimez: If you want to dampin your car def. do it. Don't worry about the slight loss of performance you'll get used to it after an hour. Damping your car, if done right makes such a huge diffrence in sound quality of your system and makes the ride much nicer considering a lot of road noise disappears.
grimezAmes, Iowa · Oct 12, 2006#14
Ya, i will probably end up taking out the spare... im a huge audio phile, and I don't think i could live without the dampening.
ttufrostyDFW, USA · Oct 13, 2006#15
Out of curiosity, how much material did you end up using for the trunk and doors? I am going to dampen both my car and my wifes (Scion Xb) and want to puchase all the materail at once.
LowfrontThread starterWorcester MA · Oct 13, 2006#16
80sq feet.


Thats doing it right though. You could use less.
vodkalushRochester, NY · Oct 13, 2006#17
damn, thats a butt load.
ttufrostyDFW, USA · Oct 13, 2006#18
wow , that is a lot. It was recommende that I would only need 50sqft for the Xb, and that was the floor, doors, and hatch. So either that is wrong, or you just used quite a bit, which must make for a very quiet car.
LowfrontThread starterWorcester MA · Oct 13, 2006#19
Ya I did a crazy job on mine. Depends on how you do it. You can do a hole car with 80sq feet, just depends on how much you care about each part. Like for me the 2 front doors, trunk, and rare deck were what I was concerned so I put it all on those spots. Thats no double layer either, just hardly any metal showing.