Yarisworld Archive

Anyone tried to appy Apexi SAFC or anything similar on their YARIIIII??

24 posts · 11,735 views

oscaryingOriginal postSydney · Oct 7, 2006#1
Does it work ??

Replies 23

KatanaUnder the hood! · Oct 7, 2006#2
Why to use it?
paultyler_82USA · Oct 7, 2006#3
I beleive Power Enterprise's CamCon works on our car and can modify the VVT-i engagement points.
oscaryingThread starterSydney · Oct 7, 2006#4
Originally Posted by Katana
Why to use it?
can't it make better fuel efficiency and can't it also make the VVTi activate earlier to give power rather than rev it??
i m not sure ..
KatanaUnder the hood! · Oct 8, 2006#5
Sounds nice idea.
ChinoCharlesOH · Oct 8, 2006#6
Like a VTEC controller for Hondas, eh?
oscaryingThread starterSydney · Oct 8, 2006#7
Originally Posted by ChinoCharles
Like a VTEC controller for Hondas, eh?

yes,exactly,but i m just not sure it can be applied on yaris or not...
EnduroMTSBay Area, CA · Oct 9, 2006#8
Im almost positive it wotn help the Yaris much. We hooked up one on the Celica, VVTL-I GTS didnt do anything but actually cause problems. Might be different for the yaris, but If it works let me know :)
oscaryingThread starterSydney · Oct 9, 2006#9
Originally Posted by EnduroMTS
Im almost positive it wotn help the Yaris much. We hooked up one on the Celica, VVTL-I GTS didnt do anything but actually cause problems. Might be different for the yaris, but If it works let me know :)

what problem does it cause?
i would like to make sure it helps before i buy it ...cause i know it helps on
Vtec engine,but just not sure it helps on VVTi or not
KatanaUnder the hood! · Oct 9, 2006#10
Ι think you won't have steady engine rpms.
oscaryingThread starterSydney · Oct 9, 2006#11
Originally Posted by Katana
Ι think you won't have steady engine rpms.
but does it really help on fuel ratio and controlling the vvti ?
I 've seen people installed on ECHO on the nets before with the pen-shape turbo timer...why they installed a turbo timer on a NA echo...with SAFC...
i don't know...may be it gives a ricer impression??that's why i m asking since the SAFC has a good looking and if it really helps the engine i will go for it,
but if not..i won't
KatanaUnder the hood! · Oct 9, 2006#12
Without being a mechanic, I am of the opinion that it won't help.
firefly1_0Edmonton Alberta Canada · Oct 19, 2006#13
there is a big difference between Vtec and VVt-i. an engine with a performance based thing like Vtec and an economy based thing like VVt-i place it in two different worlds.

think about how they both work. honda's will change the valve train to a bigger lift and bigger overlap at a specified RPM, it never changes unless you have an aftermarket ECU that you can change the engagement point.
VVt-i will only change the timing of each cam and its constantly evolving during engine operation.
you want more power in these things, buy a compresser, or swap in something else...
KatanaUnder the hood! · Oct 19, 2006#14
...exactly!
hosmerProvidence RI · Oct 19, 2006#15
VVTi - controlled by the TPS (throttle position sensor)

Vtec - controlled by engine RPMs


The VVTi advances timing and starts the valve overlap as soon as you put your foot (about) 3/4 of the way to the floor and returns to "normal" when cruising....theres no real way to change the engagement time

Vtec is a whole seperate cam profile where the camshft actually slides over to a more aggressive profile (Vtec camshafts have 3 sets of lobes for each cylinder). So with an aftermarket controller you can activate the aggressive cam profile sooner getting a bit more power

Toyota VVTi (1JZGTE) HKS cams:

Picture not included in this copy


Honda B16A cams (3 lobes per cylinder):

Picture not included in this copy
paultyler_82USA · Oct 19, 2006#16
I know that overriding the ECU on Nissan engines to modify the CVVT helps performance, but maybe Nissan goes about things a different way, basically, CVVT advances the cams forward under heavy throttle to give more performance, until it senses knock, then it retards the cam back a bit.
firefly1_0Edmonton Alberta Canada · Oct 20, 2006#17
i'm sorry,

there is a huge difference between valve overlap and bigger lift on a third lobe then there is in a variable overlap system like VVT-i.

VVT-i does nothing for adding more lift...

there is nothing that says that VVT-i adds power. VTEC does...
paultyler_82USA · Oct 20, 2006#18
Originally Posted by cdydjded
Also VVTi does do the same as VTEC. VTEC is done with a 3rd lobe, VVTi is done with a sliding pin. Go here http://en.wikipedia.org/wiki/VVT-i if you want an exact explination. 🙂
Actually that's VVTL-i, it does vary the lift, unlike VVT-i.

and actually, all engines that use some sort of variable cam timing system like Toyota's VVT-i or Nissan's CVVT, use such a system for the performance benefit, it's there to squeeze a few extra horses out of the engine at high RPMs or hard throttle. Although it may not be as noticable in the VVT-i engine as it is in one of Nissan's CVVT engines (they can advance and retard BOTH the intake and exhaust valve cams) or in Honda's VTEC (of course the added benefit of variable lift.) but it is there for the same reason, it is a much more noticable difference on a Dual VVT-i or a VVTL-i engine, of course.
firefly1_0Edmonton Alberta Canada · Oct 20, 2006#19
i would see no problem with using a system like an SAFC on a VVTL-i engine as it is like honda's i-VTEC.


the original question here was would it work on the yaris engine which to the best of my knowledge does not have a VVTL-i, so my answer is still no.

there is no way to even compare a VVT-i engine to an engine that has VTEC or i-VTEC.

its two completely different systems...

but i guess my line of work remanufacturing crankshafts and camshafts all day means nothing here.
KatanaUnder the hood! · Oct 21, 2006#20
The only thing that VVTi does is to give more power at low rpms.

Imagine that.The old Toyota Starlet had a 1.3lt engine and 83ps.The new Toyota Yaris has a 1.3lt engine and 87ps, being equipped with VVTi.So, the VVTi did not help the engine to gain some hp, but it made it more driveable, giving more power at low rpms.
YarisPRMayaWest, Puerto Rico · Oct 21, 2006#21
We just have to wait until someone does it😈

I know a guy who alter the activation of the VVT-i and did some other things on his Corrolla XR-S and he sure like beating the ass of some Nissan 350Z.... I must clarufy its a engine reving at 8,000rpm 😈
KatanaUnder the hood! · Oct 21, 2006#22
Μaybe he added a four throttle!
paultyler_82USA · Oct 21, 2006#23
The basic point is, Yes, the Power Enterprise CAMCON will modify VVT-i engagement, however, this isn't going to be a plug-and-play, get-more-power mod, it's really meant for fine-tuning a heavily modified intake/engine/exhaust system, and you need to know what you're doing
ChinoCharlesOH · Oct 21, 2006#24
You can take your car to a dyno shop whenever you want and they will probably be able to yank more power out of it... either stock or heavily modified.

They'll kill your mileage, though.