I would love to get some info can't find the specs for this wheel i have, got it used from a friend of mine. It would be much appreciated!
Motegi Racing MR7 wheel Spec?
14 posts 路 10,508 views
Replies 13
The spec will *probably* be printed on the inside of the wheel.
17 x ___
___ mm offset
weight= ______
Those are the specs that matter. 馃檪
17 x ___
___ mm offset
weight= ______
Those are the specs that matter. 馃檪
hmmm... i cleaned all four wheels and didn't see anything i'm gonna try again online just in case.
Motegi MR7
14 x 6.0, ET35
15 x 6.5, ET35
16 x 7.0, ET42
17 x 7.0, ET40
18 x 7.5, ET45
14 x 6.0, ET35
15 x 6.5, ET35
16 x 7.0, ET42
17 x 7.0, ET40
18 x 7.5, ET45
tnx
kimona ftw
fo sho man!
Weight!!!! I had a set of Motegi MR7's they were 17s...they weighed 22lbs a pop!!! Before tires! Good wheels to work out with, horrible for track use and mpgs!
mr7s = anchors
Ya my Konig Daylights are definitely for show, not for go. Most of the "cool" lookin wheels are heavy. I had a Motegi wheel set on my R32 a few years ago. They were light. LC-5s sounds about right though. Whatever they were, the car felt peppier.
Garm had recommended some wheels to me a while back. SSR?
Good luck with whatever you use.
Garm had recommended some wheels to me a while back. SSR?
Good luck with whatever you use.
SSR is a great wheel, and I use nothing else, but expensive.
Now we know (thanks to Tamago) that Miata spec wheels fit, so there are quite few choices in cool, lightweight wheels.
Now we know (thanks to Tamago) that Miata spec wheels fit, so there are quite few choices in cool, lightweight wheels.
Thats a good site for if you just wanna do a one stop shop on a nice wheel setup for track use...Good find Echo!
Hey guys, I did some checking and found the daylites at 17 inches at 14lbs. That sounds light, is that correct? If so not as bad as I thought...
awesome find echo!!