Yarisworld Archive

depo hid retrofit w/high beam?

5 posts · 3,294 views

bladesmith6Original postPA · Jun 20, 2009#1
I tried to search this out but could not find anything short of a custom harness. I have the depo projectors(unfortunately) and I was going to install HID in the low beams but in this state I have yearly inspections so I need to have functioning high beams. I don't plan on needing them but they have to work and I don't want to buy a second set of HIDS I'd just like to hook up the halogens that come with the lights. Has anyone done this?

Replies 4

IllusionXBrossard, QC · Jun 21, 2009#2
they are separated light bulbs. so it wouldn't affect anything if you just changed the low beams and keep the highs.
bladesmith6Thread starterPA · Jun 21, 2009#3
That's what I was going to do, but I didn't know if I could just connect the high beams into the HID harness so that they would work. If I didn't have a damned state inspection every year I wouldn't worry about it.
IllusionXBrossard, QC · Jun 22, 2009#4
why would you want to plug the high beam harness into the HID ?? plug the lowbeam to the HID and plug high beam to the high beam halogen bulb ?
bladesmith6Thread starterPA · Jun 22, 2009#5
OK, lets try this again. The depo lights take H1 bulbs, most HID H1 kits are set up that you lose the halogen high beam, I can't have that with my state inspection. As far as I know short of a custom harness you can't just plug it in, that's what I'm trying to see if anyone has found a way around it. or if a bi-xenon kit will fit but I really didn't want to go that route.