Yarisworld Archive

HELP! Removing manual window crank

9 posts · 16,714 views

AstromanOriginal postWenatchee, WA · May 26, 2009#1
Searched, and tried, but I can't get the stupid window crank off. I know there is a metal clip in there, and heard something about a "rag" trick. Putting tint on my girlfriends windows and although I was able to get the door panel off enough to get the tint on, getting the door panel back on with the crank still on there is posing a problem. Any help would be appreciated, especially if you can post pics.

Thanks!!

Replies 8

evil geniusHI · May 26, 2009#2
Slide rag between crank base and door panel, then move rag side to side. The clip should pop off, then you can pull the handle off.
yaris-meAnaheim, CA · May 26, 2009#3
Bend the end of a wire like a large paper clip into a hook. Push down on the door panel opposite the crank handle. You should see the clip. Hook the clip and pull it out.
AstromanThread starterWenatchee, WA · May 26, 2009#4
Can't wait to go and try these tips. Going to finish the tint on the '09 and hopefully get started on the '07 today.
WeeYariGeorgetown, Ontario, Canada · May 26, 2009#5
Popped mine off many times with the cloth trick. Got pics somewhere that I took but never posted for a speaker DIY.
AstromanThread starterWenatchee, WA · May 26, 2009#6
I think my problem last night was the rag was too thick. I'll find an old t-shirt, that should work better. I'm used to the old cars that just had a cap on the crank, and a simple screw holding it on there.
WeeYariGeorgetown, Ontario, Canada · May 26, 2009#7
I had an old supply of baby wash cloths around which happened to work perfectly. I hear ya about the old cap and screw.
WeeYariGeorgetown, Ontario, Canada · May 26, 2009#8
.
PICT0101 (Medium).JPGPICT0102 (Medium).JPG
talnlnkySpokane, Wa · May 26, 2009#9
they sell little metal tools that do the same if you're somebody that does this often... I still have mine... cost like $7 back in 2001 and I've used it probably 15 times.