Yarisworld Archive

Drag Dr-5 Rim Project

13 posts · 3,365 views

ImportRacer88Original postMeshoppen, Pa 18630 · May 20, 2009#1
Ok I didnt know where to post this... so Im Posting this Here.... I curently have 17in Drag Dr-5 Rims.. I know They are out dated. so im bringing them todate by polishing they to a miror shine here is what i have so far The first is what i got so far the 2nd is before and the 3rd is in progress...
so tell me what you think

3 attachments not included in this copy

Replies 12

TamagoOff Grid · May 20, 2009#2
you'll want to use 00 steel wool, then a powerball mini :)

looks good so far!
ImportRacer88Thread starterMeshoppen, Pa 18630 · May 20, 2009#3
wat to even it out and polish it i was gunna start hand wet sanding startin at 1000 grit going up to 2000 grit then use a buffing compound to polish
TamagoOff Grid · May 20, 2009#4
make sure and use a sanding block
kimonaHuntington Bch, CA · May 20, 2009#5
Nice going. Keep us posted on your progress.
ivanmadelineNC · May 20, 2009#6
They look good. Post pictures when you are done and have them in the car.
ImportRacer88Thread starterMeshoppen, Pa 18630 · May 20, 2009#7
Ive been workin on this for like a week now the shiny one is the only one i got that far. the one with the grinder on it is the 2nd one i started this is hard work and costly too.
severous01SE Texas · May 20, 2009#8
i used sandblast to get rid of coating, ball with 3m high cut polishing compound, then a 3m high polish compound on my boyd coddingtons....

all with a flitz ball
ImportRacer88Thread starterMeshoppen, Pa 18630 · May 26, 2009#9
Im using the turtlewax rubing compound and i tried the 00 stut it look Steel wool but it makes it look like shittocky mushrooms. so im using my angle grinder with medium and fine pads and then the compound and it looks good.... good enuff for me for right now when i get back to pa where im moving back to i will do more to them
Kaotic LazagnaCentral Valley, CA · May 27, 2009#10
Are you just going to do the spokes and the outer rim? Keep us posted.
ImportRacer88Thread starterMeshoppen, Pa 18630 · May 27, 2009#11
just the spokes ant the thin outer part
33OHDover, Ohio · May 28, 2009#12
Where you moving to in PA?
ImportRacer88Thread starterMeshoppen, Pa 18630 · May 28, 2009#13
its called meshoppen 26 mins north of scranton on route 6
FYI the rim project is off i sold the rims and tires just to survive the week and than i should be up in pa by the 7th