Yarisworld Archive

Tach ECU wire, auto

9 posts 路 4,190 views

Liu997Original postHicksville, LI 路 May 3, 2009#1
I was just installing a tach on my yaris when, I realized that I didn't have the greenish blue wire on my OBD II port. I am guessing that an auto has it on a different wire. Can someone tell me which one is it?

Replies 8

PHXDEMONPhoenix, AZ 路 May 3, 2009#2
馃し Your best bet would probably be to swap to a manual transmission so you actually utilize a tach
Liu997Thread starterHicksville, LI 路 May 3, 2009#3
no one knows, or have installed a tach on an auto?
CTScottUSA, CT 路 May 3, 2009#4
Same position, but on my 09 it is beige:

schleppyBoston, MA 路 May 5, 2009#5
^ I used that same wire and it works great.
Liu997Thread starterHicksville, LI 路 May 5, 2009#6
What should I set the tach to, I am guessing 4 cly. But when I reved it up in neutral, it went to 7K rpm. Just thinking thats kinda odd.
mikenacaratoBrentwood, TN 路 May 5, 2009#7
it does on mine too. why do do you even need a tach for an auto?
Liu997Thread starterHicksville, LI 路 May 5, 2009#8
idk, just like to see whats happening and or if the auto is shifting dumbly
GnomeBodyUS-V.A. 路 May 6, 2009#9
lol Im driven an auto and I put in a tach too

we may not need it for shifting but its still nice to see the RPMs for what ever reason. In my last car (also an auto) it had a stock tach, At one point I started having this misfire that would only occur between 3700 & 4300 rpm. It was a dead give away when I googled 'misfire' and the said RPM range. if it wasnt for the tach I wouldnt have been able to diagnose it myself, so IMO, tachs arnt just for shiftin馃憤.