Yarisworld Archive

pulled and rolled

30 posts 路 6,721 views

BrazdonWOriginal postColumbia, MD 路 Apr 27, 2009#1
I had my fenders pulled and rolled all the way around to be flush with my wheels which have a +15 offset
and i have -1.5 camber in the front
i tried to take pictures that do it justice but it seems my car being white and not giving off a ton of reflections its a little hard to tell exactly but here they are.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Replies 29

StefanVVTiBucharest, Romania, Europe 路 Apr 27, 2009#2
WIDE Yaris! Looks great!! 馃帀馃帀
tk-421Dagobah 路 Apr 27, 2009#3
Looking good as always...
Are you getting that bottom grille painted again?
BrazdonWThread starterColumbia, MD 路 Apr 27, 2009#4
yes i just haven't had the weather till recently lol
whooppee777Maryland 路 Apr 27, 2009#5
tits
kngrsllSpartanburg, SC 路 Apr 27, 2009#6
yum
AlainMikliSF, CA 路 Apr 27, 2009#7
Nice馃

i havent seen a flush yaris yet~~
johnnypaseoSocal SF valley 路 Apr 27, 2009#8
nice!! wats size r those wheels/tires any rubbing issues, been thinking bout getting rid of mi kaminari kit and getting wide wheels =)
BrazdonWThread starterColumbia, MD 路 Apr 27, 2009#9
stock tires with 15x7 wheels with a +15 offset

there was little rubbing with an extra person in the car on very hard turns
otherwise it was fine

now there is no rubbing cause its pulled and rolled and camber in the front lol
YarisFan007L.A. county, CA 路 Apr 27, 2009#10
dats nice!
BLAZINBLUEVITZNEW YORK 路 Apr 28, 2009#11
what was cost of fender job?
CTScottUSA, CT 路 Apr 28, 2009#12
That looks awesome! It looks like they rolled the bumper as well to match?
BrazdonWThread starterColumbia, MD 路 Apr 28, 2009#13
IAG in westminster md charges around $150
and they did a little bumper rolling but it was mostly fenders since they had to pull as well!
LafiroNYC 路 Apr 28, 2009#14
When this is done, I would assume the metal parts holding everything together is pulled as well? And does this damage the paint?
cali yarisCanoga Park, CA 路 Apr 28, 2009#15
My paint chipped on the edges when we did mine. That looks very clean -- close up pics please.
BrazdonWThread starterColumbia, MD 路 Apr 28, 2009#16
yeah anything that is pulled or rolled the parts that connect go with it
my paint didnt crack or chip at all iag did a great job i cant say enough about how great their work is
i will get some close ups of paint when i get home
marcustoronto, canada 路 Apr 28, 2009#17
yah closer pixs pls front and rear..
fujiHonolulu 路 Apr 28, 2009#18
I think I might have to also do this!
marcustoronto, canada 路 Apr 28, 2009#19
does this misallign ur plastic bumpers..
33OHDover, Ohio 路 Apr 28, 2009#20
It looks like it did a little bit, but it still looks great.
BrazdonWThread starterColumbia, MD 路 Apr 28, 2009#21
the spot where i can see it doesnt line up perfectly (still very well) is from where i got in a head on with a tree 2 winters ago
its very slight though
BrazdonWThread starterColumbia, MD 路 Apr 28, 2009#22
here ya go cali

Picture not included in this copy
Picture not included in this copy
marcustoronto, canada 路 Apr 28, 2009#23
not bad... would it still rub if the car is full..
BrazdonWThread starterColumbia, MD 路 Apr 28, 2009#24
well the car only gets 2 people full lol
if you were to buy my same wheels and get the fenders pulled/rolled with a back seat i would just get them pulled further
to answer your question though i drove around last night with my buddy basically turning it as hard as i could with no rubbing
the front camber helps with that up front
BrazdonWThread starterColumbia, MD 路 Apr 28, 2009#25
there is a vendor here who has them
someone chime in and say who? im not sure
i got mine off ebay for like 250 shipped and they took forever
YarisSedanCalifornia - Bay Area 路 Apr 29, 2009#27
I did this for my friends car wasnt that hard. He rented some kit from ebay for 50 bucks i think. That came with the fender roller and a heater to heat the paint up to prevent cracking. Came out okay. There was still a slight rub but was better atleast.
Carpe_DiemColumbia, Maryland 路 Apr 29, 2009#28
looking sooooooo good. MD represent! haha
CtrlAltDefeatIndianapolis IN 路 Apr 30, 2009#29
looks good! 馃帀
9vaporsNY 路 May 6, 2009#30
Nice, I told you IAG was the shizzle...