Yarisworld Archive

HELP

15 posts · 3,273 views

KlintonOriginal postOKC · Apr 23, 2009#1
IM STUCK ON THE CRANK PULLEY INSTALL PLEASE SOMEONE HELP ME I HAVE TO DRIVE TO WORK TOMORROW AND IM STUCK WITH THE CAR IN PIEACES 8157155751 I NEED HELP

Replies 14

CreeperGeorgia · Apr 23, 2009#2
what are you stuck with on the install? ahve you checked the diy? need more info if you want us to help
KlintonThread starterOKC · Apr 23, 2009#3
ok i have the diy open and i cant get the alternator to go forward
KlintonThread starterOKC · Apr 23, 2009#4
please guys help me out i need to drive to work tomorrow and this bad boy needs to be in one peace
CreeperGeorgia · Apr 23, 2009#5
very very VERY gently tap it forward with a rubber mallet. if that dosnt work try taking it off? just make sure you make everything first. maybe try lossening some of the other bolts?
KlintonThread starterOKC · Apr 23, 2009#6
please anyone who can help im freakin
CreeperGeorgia · Apr 23, 2009#7
or if nothen else put it abck together and save the install for when you have more time
KlintonThread starterOKC · Apr 23, 2009#8
i have time i think i may have broke something and i just want to put it on and then work what i may have broke
LtNoogieWest Hills, CA · Apr 23, 2009#9
Were you able to loosen the lower alternator bolt? That one is a bitch to loosen.
GideonSunnyvale, CA · Apr 23, 2009#10
When I did mine I didn't bother moving the alternator forward to release tension on the belt, I just removed the crank pulley with the tension on it, and installed the new pulley.

I have the underdrive pulley so I had to pull the alternator forward towards the bumper to increase the belt tension, which was easy.

If you have just the lightweight pulley I don't know if that way will work since the diameter is the same, but it may! I'd be worried about cross threading the crank bolt since you might have too much tension on the pulley and it may not seat straight.
cali yarisCanoga Park, CA · Apr 23, 2009#11
What happened to Klinton? Did he get it fixed? I'm just reading this, and I can't tell what was "broken" exactly.
ddongbaphay · Apr 23, 2009#12
ZOMGGGG HELPPPPPPPP
KlintonThread starterOKC · Apr 23, 2009#13
i broke my vvti cord to the engine but i got the pulley in and now my car is sitting at toyota and may bot be fixed till monday saddly
GeneralDon7Frederick, MD · Apr 27, 2009#14
May be a dumb question but whats a VVTi cord🤷
gwasabiHonolulu, Hawaii · Apr 27, 2009#15
I just used a pry bar and gently levered it forward. It didn't take take that much force to bring it forward honeslty. like i coulda put the force of two finger to bring the alternator forward with the pry bar hahaha