Yarisworld Archive

How do you remove front lip?

7 posts · 7,207 views

calicruisinOriginal postOC · Apr 14, 2009#1
I tried searching but came up with nothing. I want to replace the oem front lip on my 4 door Yaris S but I dont know how to remove it. I took off the 2 screws on each side and the 4 bolts underneath but the thing just wont come off. What am I missing? I dont have a jack at the new place I moved to so its hard since its far away from home so its making things tough to look underneath.

Replies 6

ruimondPerth, Australia · Apr 14, 2009#2
Pretty sure there's at least some sort of tape or adhesive glue used. So it won't just come off once the screws are off.

My side skirts i just got done recently are bolted on and glued on.

You might have to heat up the sides abit with a hairdryer or heatgun im guessing. Im not 100% on that so you might want to wait till someone else chimes in.
calicruisinThread starterOC · Apr 14, 2009#3
It might have at one time but I dont think that it is anymore or maybe not the whole lip anymore. Like I can move it somewhat but not the whole thing. Like I can bend the sides but not so much in the middle.
Kaotic LazagnaCentral Valley, CA · Apr 14, 2009#4
Look around the lip. Do you see a black rubber-looking thing? If so, I think that's the adhesive (in addition to the bolts/screws).
IllusionXBrossard, QC · Apr 14, 2009#5
there are at least 4 clips behind the lip. I simply yanked it out whatever was holding in the middle.

the little rubber band do adhere a little, but that's just a little. When the lip is out, you are left with a bunch of holes on the lower bumper :P
Niki KnucklesHamilton, ON, Canada · Nov 11, 2019#6
Can someone tell me where to get the rubbers in between the panels and the moldings, once you un-glue the aero package?
myfirstyotaToronto Canada · Nov 13, 2019#7
Maybe the dealer... although I have a feeling they will tell you you have to buy the entire moulding.