Yarisworld Archive

FIXING YOUR CAR DENT WITH A HAIR DRYER..?

20 posts · 19,573 views

Replies 19

YarisSedanCalifornia - Bay Area · Feb 15, 2009#2
It works. I tried this on my friends car. His was pretty big dent too. We used a heat gun though for heatshrink tubing instead of a lighter. The trick is to use the duster very fast so you see frost and POP out the dent.
texkidSugar Land, TX · Feb 16, 2009#3
Used that method on my dad's Nissan Titan. If I didn't point it out, you wouldn't notice that it was hit by a 2x4 debris from the highway.

However, I didn't use a can of duster. I heated 'til it was flexible and pushed out the dent. I might use the duster method, seems more conventional.
Klink10910 · Feb 16, 2009#4
Wow....thanks for posting.
BailOutReno, Nevada, USA · Feb 16, 2009#5
I used this technique this to remove two dents from my rear quarter panel. It took a few tries but it certainly worked.
supmetSouthern California · Feb 16, 2009#6
On plastic pieces like the bumper, just heating it til you can push it will work. On my corolla I took the bumper off and set it up about 2 feet in front of the space heater and pushed a pretty good dent out.

For metal, this totally makes sense. When you cool the metal down it will contract - this will most likely cause it to straighten out and return to its original shape.. If you have any folding this will most likely not work though. I haven't tried it, but I have a ding on the side door I might try it on. I don't know how good freezing, and then bending your paint will be.. I think you can expect chipping at some point doing this.
PattycakeThread starterSan Jose, CA · Feb 16, 2009#7
Awesome. Thanks guys!!
auxmikeLI, New Yawk · Feb 17, 2009#8
Works better with piece of dry ice.
I've seen videos showing how it's done on YouTube...
TgrChica7Douglassville, PA/Hereford, AZ · Feb 17, 2009#9
Thats awesome... probably gonna try it tomorrow..

Thanks for sharing!
TheRealEnthMiami, FL · Feb 17, 2009#10
didnt work for me -.-
Red HorseCosta mesa, California · Feb 18, 2009#11
I tried this method on a half inche dent on my fender and it did'nt work.
YAR1SRaleigh, NC · Feb 19, 2009#12
I have a real small dent on my hatch from where an irrisponsible neighbor left his can behind my car in the dark....

will it work with smaller dents?
PattycakeThread starterSan Jose, CA · Feb 22, 2009#14
Hmm I'm getting mixed reviews. So the hair dryer method doesn't work with some people, but it does work with some people. I guess I'll try out the dry ice method..
Lucas13Fort Lauderdale · Apr 14, 2009#15
Best method it’s called, Dent Wizard I used pops a dent, and some other so it your self methods and there is nothing like a real professional job.
LambpastyMassachusetts · Apr 14, 2009#16
Thanks for posting, I'll try this out tonight on a small dent in my passenger side door and let you guys know how it went.
schleppyBoston, MA · Apr 14, 2009#17
I tried it once on a small dent I had on my truck, it didn't work. I think it works best if you can do it as soon as the dent happens. The dent on my truck had been there for a while.
SpeedzBrisbane, Australia · Apr 16, 2009#18
^

i think ur trucks panel is probably too thick to make it work?
ezhacker1San Francisco · Apr 16, 2009#19
wow that is crazy amazing. I gotta try that when i get home. car Forums rock!
chasd60Maine · Apr 23, 2009#20
More heat works better. I used to work in a shipyard and that is the same principle used to straighten steel walls and floors. They use a torch with a rose bud tip and hit it with cold water almost instantly. The rooms they work in are like a sauna.