Yarisworld Archive

Pioneer Avic-D3 VSS wire problem

6 posts · 5,691 views

TWEAKED_ICEOriginal postGlendora, CA · Jan 12, 2009#1
So, I just installed an Avic-D3 on my girlfriends 09 Yaris-S, tapped the vss wire to the purple wire via instructions found here on yarisworld.... but, there is no signal coming through. Is it differenent on the 09? I would assume not, but I'm willing to try anything at this point.

Used this for reference:
Picture not included in this copy

Any suggestions?

Replies 5

TWEAKED_ICEThread starterGlendora, CA · Jan 21, 2009#2
Any help?
eTiMaGoBangkok, Thailand · Jan 21, 2009#3
I'm not sure myself, really... What I do know is that between 07 and 08 the tach wires changed color from green to orange, so it is possible the VSS as well. If you can't match the wire color, maybe try looking up the actual pin location, that should remain the same.
CTScottUSA, CT · Jan 21, 2009#4
The easiest place to grab VSS is at the TPWS connector (behind the lower passenger glove box)

TPWS location:

Picture not included in this copy


VSS wire location:

Picture not included in this copy
TWEAKED_ICEThread starterGlendora, CA · Feb 12, 2009#5
perfect! thank you for that, i'll try it out!
ali077Mauritius · Aug 16, 2010#6
i need help plz... i drive a vitz trd turbo 2003. ive installed a pioneer vdp and i need a speed signal wire for the vdp to work. any1 can help?