Yarisworld Archive

how to change headlight bulbs?

56 posts · 185,840 views · page 2 of 2

Replies continued

ExiwolfmanWasaga beach · Nov 23, 2014#51
Originally Posted by bobolinko ↑
That is the Parking light bulb

#168 lamp
194 bulb i use led 6000k and they look and work awesome .
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Nov 23, 2014#52
Changing the bulb without touching the bumper is all about hand size. The bulb has been replaced twice on each side on my 2007. Re the first replacement, I tore some skin trying to change the first one, until I realized my hand was too big. I took it to a local Toyota dealer, and I believe they charged me $16.00 to put the bulb in. I've also taken the car there for the last three bulb changes (all four times, I bought the bulb elsewhere) and they either didn't charge me for any of those three...or may have charged me $16.00 for one of the the three. Someone has always been available who has a small enough hand.
07liftbackBay Area · Jan 23, 2015#53
Just got done changing my 07 Liftback's lights and I must say, it was taking forever as I initially gave up after the first 5 minutes. After a bit of research, I'm surprised no one posted any service manual pics on here of how the retaining clips worked. There was no need to pull the bumper cover and remove the headlights. My hands are relatively large and I too initially had an issue pulling the retaining clips together to release the headlight.

The bigger issue that wasn't mentioned here was the fact that the boot seal was seized onto the headlight bulb with the devil's grip. People on other forums said to use a screw driver to pry it off but I couldn't even get the screw driver angled correctly to pry the boot off.

What I did was I reached behind the boot cover and pulled one side of the retaining clip to release that side but had trouble releasing the opposite side. So I grabbed my house key and jammed it between the headlight housing and the other side of the retaining clip to release it.

Now all I had to do was pull the boot cover out with the attached headlight bulb.

This all took maybe 5 minutes total regardless of how lengthy the process may have sounded. I'll attach the pictures from the service manual on this post to show you guys how the retaining clips work as well as how to remove the bumper cover for those who choose to go that route.
bumper yaris.pngretaining clips.png
tmontagueCaledonia Ont. · Nov 5, 2015#54
I wouldn't even try to change a bulb in the yaris without removing the headlight. I value the skin on my hands too much and I have mitts for hands.

Once you remove the bumper once, you'll realize how easy it is and just keep doing that.

Just keep all of the bottom screws in and the bumper just moves forward more than enough to remove the lights. Takes all of 5 mins.

Just make sure you tape your metal side panels near where it meets the bumper so you don't scratch them...ask me how I know
badPennsylvania · Apr 17, 2016#55
I did it on the passenger side without taking the whole assembly or the front bumper off. I used this guys video and the eyes in my fingers: https://www.youtube.com/watch?v=rPpXkBBfYEU

The whole video is good, but especially 13:54 is the best part.

By the way, the fat tab went up and the clip flops down when you take the bulb out. It flops upward when putting the bulb back in. Don't put grease on the contacts until after you put the bulb in and the boot on. Use vinyl or nitrile gloves when handling the bulb. Use a flat head screw driver to gently pry the boot off. Watch the video. These directions I am giving are not in order. Look at the bulb and the clips through the front of the headlight assembly while taking the bulb out and putting it back in.

It took about an hour.
robkayNW OH · May 1, 2016#56
If you figure on having your Yaris for a while you can get a pack of clips cheap on eBay. Pick up a set now to have in your box for next time.