Yarisworld Archive

How much power runs through the Remote line for an amp?

12 posts · 4,082 views

TinyGiantOriginal postRochester, NH · Oct 29, 2008#1
I have a set of LED that i have mounted in my woofer setup and was wondering how much power is put through the remote line that turns the subwoofer on and off..

if its 12v or so I could use that to power the LED as well as keeping the amp on..

anyone have any idea?

Replies 11

battleversiontc808 · Oct 29, 2008#2
its 12v yeah you cna use it to power your leds and amp
IllusionXBrossard, QC · Oct 29, 2008#3
i last read the spec of a sony xplod cd/mp3/usb player.. and i remember seeing 300mA max on the amp remote wire. (obviously at 12v though... the amp needs +12V to turn on)
sportin83central IL · Oct 29, 2008#4
u can run a few leds but not much more than that or you could overdraw the remote output of the deck.
TinyGiantThread starterRochester, NH · Oct 29, 2008#5
I ran 4 LED on it . I have it all wired and installed now .. jsut waiting for the ebayer to actually ship my dvd player :(
battleversiontc808 · Oct 29, 2008#6
you can actually run up to 6 leds cause when the car is at rest it sits at 12v but once the car is started and the alt is running it actually goes to 14.4v
talnlnkySpokane, Wa · Oct 29, 2008#7
don't use a power turn on wire from a deck to turn on neons... if you blow that its a PITA to get amps to turn on.

Use a relay.. they cost $4 at an auto parts store and when hooked up right can handle like 30amps versus .3amps.
battleversiontc808 · Oct 29, 2008#8
or instead of running a relay you can drop a new line off the positive side of the cig lighter or and you can hook it up to a switch and i would like to mention you dont need a whole lot to power an led so a 30 amp relay is not nec they require aroung 1-3 volts so its not a whole lot and if you can drop two amps onto on single amp turn on you can wire up alot to it
TinyGiantThread starterRochester, NH · Oct 29, 2008#9
i just have 4 led on there with a resistor in line
TinyGiantThread starterRochester, NH · Oct 29, 2008#10
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy


the camera doesnt do it justice.. the whole middle lights up so you see the toyota emblem :)

I might put it inline with the amp power with a switch.. but the idea of it automatically coming on with the amp is nice
treppenJ-ville Flo-rida · Oct 29, 2008#11
thats a sweet set up, good job👍
TinyGiantThread starterRochester, NH · Oct 29, 2008#12
i thought i should use that plexi some how.. especially since it was JL and the Sub is JL