Yarisworld Archive

SEAT BOLTS

11 posts · 17,637 views

07WYarisRSOriginal postRidgeway Ontario · Sep 19, 2006#1
Anyone know the size and where to buy the socket or wrench to unbolt the seat from the floor?

I'm wanting to remove the seats to see if there is room to install an amp under the seat but can't find a socket to fit the odd Torx style bolt.

Replies 10

badhabitzcalifornia · Sep 19, 2006#2
i havent done it before on a yaris but i work on cars and my guess is its a 14mm socket you can get this at any tool store depends on what ur willing to spend ill check tomorrow and get back at yah
03Z33SoCal · Sep 19, 2006#3
That's it, 14mm 6 point or 12 point socket works. It's the same as the rear seats.

I believe the torx size is T-30 (female/socket)
07WYarisRSThread starterRidgeway Ontario · Sep 19, 2006#4
Yeah is a small torx ( male) bolt that requires a female socket.

T-30 ya say... i'll check it out
thanks
ViolinNew Jersey · Sep 19, 2006#6
Good detective work.

Thanks.
07WYarisRSThread starterRidgeway Ontario · Sep 19, 2006#7
Awesome

thanks a ton
imknotrightPhilly · Sep 24, 2006#8
AKA Inverted TORX
EnduroMTSBay Area, CA · Oct 5, 2006#9
This thread is helpful! I almost gave up on installing the new seats :)
jeff_oCedar Knolls, Morris County, New Jersey · Oct 5, 2006#10
isn't that AKA hex bolt?
07WYarisRSThread starterRidgeway Ontario · Oct 5, 2006#11
I bought an external torx set from harbor freight for $6