riceboyOriginal postCAN 路 Sep 16, 2006#1First off sorry no DIY didn't have a camera on me, second of all sorry for the crappy pics but that's the best my camera will do in the dark... it's actually far brighter in person...
Anyways, I had two hours to kill today so me and a buddy hooked up 2 15" white streetglow neons under the dash.. Everything fits nice inside the underside of the dash with a couple of zip ties, all you really need to access is to remove the two panels which are attached by a clip on the passenger side, and a clip and two screws on the driver side.. I ran the wires to the power door lock control next to the e-brake, and hooked up a simple switch,.. ran some power form the fuse box and voila... $25CAD for the lights off the net, and a quick/fun install.. and I saved myself $137.00 off the TRDsource pricing.... 馃憤
Replies 26
fnkngrvIn The Hotbox 路 Sep 16, 2006#2Nice馃憦 ...the pics aren't that bad either....I can't wait to do mine...
riceboyThread starterCAN 路 Sep 17, 2006#3You might want to consider going with the smaller 9" tubes... the 15" was a tight fit on the passenger side....
fred812pa 路 Sep 18, 2006#4You can buy round neon's that are made to go around woofer's they have a clear plastic cover to protect tubes and fit nicely under the seats giving 360 degree light display, also they have a beat to music setting that looks kool for added rice effect! 4 zip ties to the seat under wire support frame in less time than it takes to hide your wires you have 2 fully wired neon rings. they have a box of blue left at a discount store here in York. they have 8's 10' 12's may see if I can get a set of 10' to fit the yaris.
1 attachment not included in this copy
tca4Delta,BC 路 Sep 18, 2006#5Woo i like it =) not too bright gives me this cozy feel
riceboyThread starterCAN 路 Sep 18, 2006#6 Originally Posted by tca4
Woo i like it =) not too bright gives me this cozy feel
lol.. keep your pants on buddy... 馃榿
vodkalushRochester, NY 路 Sep 18, 2006#7if you dont want them too bright you can stick the lights above the pedal area (on the plastic, no below hanging) when you do it.
I'll take pics of mine and post them later....
ViolinNew Jersey 路 Oct 1, 2006#8More functional than fun.
After moving my overhead dome light back to accomodate my sunroof, the front of my Yaris was a little dark so I wired these babies in with the dome light circuit so they fade on with the door opening. Looks downright OEM.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
riceboyThread starterCAN 路 Oct 1, 2006#9Very nice! I like having the lights there, no need to turn on the dome light if you drop something... and I installed mine on the underside and kept the plastic panels off..
07WYarisRSRidgeway Ontario 路 Oct 2, 2006#10Nice
How about a DIY
What about wiring, where and how you wired it into the interior circuit.
ViolinNew Jersey 路 Oct 2, 2006#11I got this kit (for a miata):
http://miatamania.com/Shop/ViewProdu...eIndexID=33270 (#159-950)
I had to extend the wires for the dome light so I was already working in the headliner but you could probably pick up the wires in the pillar by the driver's door.
The blue wire is the power and the white wire with the black stripe is the ground controlled by the door switch (red(pink?) is always ground - don't use).
I figured where I wanted the lights to go and removed the center console - one bolt in cup holder, remove shift knob and switches and pop console out.
I made paper templates and cut 1" x 2 1/4" (or 2 3/8"?) holes with a utility knife on each side of the console and inserted the lights.
Crimp 1/4" female spade connectors to the wires and connect them to the back of the lights. Solder and heat shrink to the wires in the pillar and you're golden.
AykaRochester, NY 路 Oct 9, 2006#12Im in the process of installing some Interior Lighting myself on my Hatchback (No Power locks/windows) and I was going to use the exisiting 12v Outlet circuit to power 2 additional 12v Outlets.
My Problem is, I dont know which wire to splice into... there are 2 going to the Power outlet, a Gray wire, and a White-Black Wire. Which one do I splice?
Have either of you encountered the 12v outlet circuit? Or do you have another suggestion of where I can tap into a 3dr Hatch for 12v power (Underside the Driver Dash, and Passenger Dash. Im installing 2 Outlets for 2 10" Blue Neons.)
Thanks!
Ayk.
ViolinNew Jersey 路 Oct 9, 2006#13For my sunroof power, I used these add-a-fuse suckers:
Picture not included in this copy http://grote.com/cgi-bin/goc/goc.cgi...number=82-2212 I found them at Auto Zone.
I ran them from the fuse panel under the driver's side dash. The only problem is now I can't put the cover back on, but it is hidden anyway.
vodkalushRochester, NY 路 Oct 9, 2006#14I'm switching my lights over to that add-on fuse tonight, as well as my power outlets (each on their own fuse, as i should have done in the first place :rollseyes:)
AykaRochester, NY 路 Oct 9, 2006#15(I am completely new to working on a Car, much less a Cars electronics.. so thank you with bearing with me and my questions.)
But where exactly do I plug in this Add-A-Fuse to? You said it means you cant put on the Glovebox again, is there a lower profile one, or somewhere that I can plug it in that doesnt cause that?
vodkalushRochester, NY 路 Oct 9, 2006#16There are two fuse boxes/panels one is located in the engine "bay" and the other is located (atleast in the US version) under the driver side door, near the dash - this is the one your intersted in. U have to simply remove the fuse panel cover and insert the "add-on" fuse into an empty slot.
There should be directions on the box as to the techincal aspects of the add-on fuse (i havent picked mine up yet or installed them yet either) when Violin gets back on hopefully he can give you an idea on/about the add-on fuse.
AykaRochester, NY 路 Oct 9, 2006#17does the Fuse Box handle grounds as well? Im having trouble figuring out where to ground these two as well...
/sigh, Jump right in =P
ViolinNew Jersey 路 Oct 9, 2006#18The fuse box I used is on the bottom of this:
Picture not included in this copy You don't need to remove the little compartment to get at it, this just helps you see it.
There is a cover on the bottom that you remove to reveal the fuses. That's the cover that won't go back on with an add-a-fuse in place.
For grounding you'll need a bolt or screw to metal someplace. Without crawling around under the dash, I can't give you any ideas right now.
1 attachment not included in this copy
AykaRochester, NY 路 Oct 9, 2006#19Ok, so the fuse connects on the Bottom Portion of that panel.. I think I can do this.
and I expect to install my own sound some day... I'll learn!
Thanks Violin
W.A.S.PWestchester County, NY 路 Oct 11, 2006#20 Originally Posted by Violin
For my sunroof power, I used these add-a-fuse suckers:
Picture not included in this copy http://grote.com/cgi-bin/goc/goc.cgi...number=82-2212 I found them at Auto Zone.
I ran them from the fuse panel under the driver's side dash. The only problem is now I can't put the cover back on, but it is hidden anyway.
Violin, did you use a standard mini blade fuse? Are they compatible with the low profile fuses in the fuse box? TIA
AykaRochester, NY 路 Oct 11, 2006#21You need to make sure that it is the MINI-FUSE for Add-a-Fuse, I accidentally got some of the regular sized suckers, and well.. time to make a return!
Mine look exactly like that, but they were Bussmann Add-a-Crct, work like a charm
ViolinNew Jersey 路 Oct 11, 2006#22I'm note really a fuseologist, but there are two sizes of blade fuses. Ours is the smaller size - that's what I used.
argylesocksmanch 路 Nov 2, 2006#23 Originally Posted by Violin
More functional than fun.
After moving my overhead dome light back to accomodate my sunroof, the front of my Yaris was a little dark so I wired these babies in with the dome light circuit so they fade on with the door opening. Looks downright OEM.
oh snap that is cool !
i want some!!!!!
mcdaddySaudi Arabia 路 Nov 4, 2006#24this is what i did during the last weekend..
Picture not included in this copy
Picture not included in this copy
it helps me see my toe nails cleaned all the time.. hahaha
BMGYarisSouth Carolina, USA 路 Nov 5, 2006#25Hey guys, i am looking for some LED under dash kits that have a switch that can turn them on and off and are super eas to install...but preferably dont use the cig lighter as that just looks too ghetto for me (couldnt just sneak them on when a girl gets in the car, she would know i was doing it on purpose). but, while i was a student electrician for one year in college all i did was change out ballast (sp?) and fix exit signs and some power outlets, i have NEVER touched anything in my car, too scary for me. Anybody know a good set to buy in paritcular or can i just pick up anything like this
http://www.oznium.com/meteor Anybody know a good diy, im pretty darn nervous about messing with wires in my car.
mcdaddySaudi Arabia 路 Nov 7, 2006#26 Originally Posted by BMGYaris
Hey guys, i am looking for some LED under dash kits that have a switch that can turn them on and off and are super eas to install...but preferably dont use the cig lighter as that just looks too ghetto for me (couldnt just sneak them on when a girl gets in the car, she would know i was doing it on purpose). but, while i was a student electrician for one year in college all i did was change out ballast (sp?) and fix exit signs and some power outlets, i have NEVER touched anything in my car, too scary for me. Anybody know a good set to buy in paritcular or can i just pick up anything like this
http://www.oznium.com/meteor Anybody know a good diy, im pretty darn nervous about messing with wires in my car.
mine turns ON when the driver or the passenger door opens then turns OFF when the door's close. just hook-up the negative wire of the LED to the negative wire/switch from the door, just make sure that the supplied positive line is the same as the dome light.... viola!!
get yourself a test light to help you out the DIY .. goodluck!!
ViolinNew Jersey 路 Nov 7, 2006#27 Originally Posted by BMGYaris
Hey guys, i am looking for some LED under dash kits that have a switch that can turn them on and off and are super eas to install...but preferably dont use the cig lighter as that just looks too ghetto for me (couldnt just sneak them on when a girl gets in the car, she would know i was doing it on purpose). but, while i was a student electrician for one year in college all i did was change out ballast (sp?) and fix exit signs and some power outlets, i have NEVER touched anything in my car, too scary for me. Anybody know a good set to buy in paritcular or can i just pick up anything like this
http://www.oznium.com/meteor Anybody know a good diy, im pretty darn nervous about messing with wires in my car.
If you did that electrical work, you shouldn't really have a problem with your car. At least 12 volt can't kill you.
If you pull the trim off the a-pillar on the driver's side, you can access the wires to the dome light. They're wrapped in electrical tape so you'll have to peel some of that back. The blue wire is the power and the white wire with the black stripe is the ground controlled by the door switch. Many of the circuits on the Yaris are backwards like that - the power is always on and the ground is switched.