hasher22Original postAustralia Sydney · Aug 31, 2006#1Hey guys i finally went around to smoke my tail lights. Tell me what u think.
P.s i didnt smoke the white parts cuz thats the reverse light, and if i did smoke em the cops will def. pull me over.
The downside of it, is that the final outcome is a matt finish. Does anyone know what clear gloss spray to buy so i can layer it with a gloss finish??
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Replies 61
DVS YARISaustralia · Aug 31, 2006#2... its different im not a big fan though, maybe if it wasnt so dark and over the whole light, but congrats on getting it done. do you ever sleep!!!
cheers curtis
oscaryingSydney · Aug 31, 2006#3what material did you use?can you teach me how to do it?
hasher22Thread starterAustralia Sydney · Aug 31, 2006#4 Originally Posted by DVS YARIS
... its different im not a big fan though, maybe if it wasnt so dark and over the whole light, but congrats on getting it done. do you ever sleep!!!
cheers curtis
Ha thanks for u opinion, i was shittin myself today cuz there were 2 cops driving behind me for like 5 mins......but i didnt get pulled over :)
oscarying sure if u wanna do it. I dont know how to take out the echo tail lights, there should be a tutorial somewhere. All u need is some tail light smokin spray paint. I its called "Nite-Shades from VHT" just go down to ur local autobarn, repco, supercheap auto and they will have it. and u need some maskin tape. (I used some cheapo crappy one. It worked like a charm")
tape up whatever parts u dont want sprayed and off you go. Unless u really want a detailed tutorial
BooMadison, WI · Aug 31, 2006#5 Originally Posted by hasher22
Hey guys i finally went around to smoke my tail lights. Tell me what u think.
P.s i didnt smoke the white parts cuz thats the reverse light, and if i did smoke em the cops will def. pull me over.
The downside of it, is that the final outcome is a matt finish. Does anyone know what clear gloss spray to buy so i can layer it with a gloss finish??
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Looks very good! I like it 🙂 !
I found an interesting thing.. the lower section of the reverse light isn't white (red instead), isn't it the rear fog light? Since ours are the same on both side.
hasher22Thread starterAustralia Sydney · Aug 31, 2006#6 Originally Posted by Boo
Looks very good! I like it 🙂 !
I found an interesting thing.. the lower section of the reverse light isn't white (red instead), isn't it the rear fog light? Since ours are the same on both side.
yup the right red light is my fog light. though u have 2 rear fog light things??
cuz in australia we only have 1 reverse light that lights up!! how stupid is that.
SimmZQuebec · Aug 31, 2006#7Humm, too much dark and too much matt... is it a film or a paint? If it's a film I suggest to try another darkness level. :)
oscaryingSydney · Aug 31, 2006#8 Originally Posted by hasher22
Ha thanks for u opinion, i was shittin myself today cuz there were 2 cops driving behind me for like 5 mins......but i didnt get pulled over :)
oscarying sure if u wanna do it. I dont know how to take out the echo tail lights, there should be a tutorial somewhere. All u need is some tail light smokin spray paint. I its called "Nite-Shades from VHT" just go down to ur local autobarn, repco, supercheap auto and they will have it. and u need some maskin tape. (I used some cheapo crappy one. It worked like a charm")
tape up whatever parts u dont want sprayed and off you go. Unless u really want a detailed tutorial
haha,i would rather give u $30 bux and do it for me
coz i don't want to fuck up my tails
Chris07LBNew Jersey · Aug 31, 2006#9Not really a fan.. 🤷
JustAnotherAsianmilpitas / santa rosa · Aug 31, 2006#10it's a little dark for my taste (well, not my taste, but the cop's taste if you know what i mean), but i like these smoked tails. 👍
approximately how many coats did you go through?
don't quote me on this, but if i remember correctly from other tutorials, regular clearcoat would do. 🤷
hasher22Thread starterAustralia Sydney · Aug 31, 2006#11I put on 3 coats....ummmmm yea the matt finish i have to buy gloss paint to gloss it up....
everyone has their likes and dislikes.......i personally like it cuz its different....would like it even better if i glossed it up....
riceboyCAN · Aug 31, 2006#12glad to see that you got it done!
Yaris_PRPuerto Rico · Aug 31, 2006#13Hey Hasher you finaly did it. It's looks great for me. Just get some clear paint and end the job. ohhh and take some night pictures...
hasher22Thread starterAustralia Sydney · Sep 1, 2006#14Hehe yup......
update : I glossed it up......looks hella legit now!!! ill take nite pics soon and glossed up pics soon!!
Ill make a tutorial if anyone is interested....
KatanaUnder the hood! · Sep 1, 2006#15Come on, you know that I am a huge fan of your tutorials, so please get to work now!!!!
hasher22Thread starterAustralia Sydney · Sep 2, 2006#16Look mum! ITS SHINY!!!
Picture not included in this copy
Picture not included in this copy
tutorial cummin soon when i can be bothered...
im kinda bothered, its not dark enough for me, the gloss coat made it lighter.....damn thing!
Chris07LBNew Jersey · Sep 2, 2006#17Looks way better, even though it turned out a bit lighter. 😎
KatanaUnder the hood! · Sep 2, 2006#18Οh yeah, now it looks great.Please give us a tutorial!!!
riceboyCAN · Sep 2, 2006#19Agreed.. this looks better than the initial finished product....
BooMadison, WI · Sep 2, 2006#20 Originally Posted by hasher22
Look mum! ITS SHINY!!!
Picture not included in this copy
tutorial cummin soon when i can be bothered...
im kinda bothered, its not dark enough for me, the gloss coat made it lighter.....damn thing!
Very OE feel. Looks great 👍
ChinoCharlesOH · Sep 2, 2006#21Wow, you got saved there, because the flat black looked like crapola. Looks nice now.
casterqcCanada · Sep 2, 2006#22It looks real good know!!...I am still looking for a place here where I could get smoked film installed for not much $$...and if I find nothing and the only way to do it is the spray paint...that's what I'll do!
hasher22Thread starterAustralia Sydney · Sep 2, 2006#23 Originally Posted by casterqc
It looks real good know!!...I am still looking for a place here where I could get smoked film installed for not much $$...and if I find nothing and the only way to do it is the spray paint...that's what I'll do!
yea just get spray paint. Thats what i did. U wanna spray on even coats. If your gonna buy the brand i used. Get some clear gloss paint too...
KatanaUnder the hood! · Sep 3, 2006#24Please mate give us a tutorial!!!
KatanaUnder the hood! · Oct 22, 2006#25Up!!
When you have the time, give us a tutorial, or some basic instructions.
hasher22Thread starterAustralia Sydney · Oct 22, 2006#26Hahaha what an old topic................ill give u guys the tutorial on how i did it tomorrow..... its 10 21pm and i really need to get some sleep :(
KatanaUnder the hood! · Oct 22, 2006#27Υeah fine!
Yeeehhhhaaaa!
littlecarloveKY · Oct 22, 2006#28I didn't like the matt finish - but now they POP!
Looks nice.
Hays
KatanaUnder the hood! · Oct 22, 2006#29Υeap, the gloss finish is excellent.
ChinoCharlesOH · Oct 22, 2006#30 Originally Posted by echo_hrs
I thought so... but the question becomes for a sloping headlight like on the Yaris how does it make any sense that a flat piece of vinyl would fit over it... I mean wouldn't it stretch around the curves and leave you with lighter spots and darker spots? I always wondered this.
KatanaUnder the hood! · Oct 22, 2006#31 Originally Posted by echo_hrs
Thanks for posting.Nice idea, but they are a bit dark.
Can I put these vinyls on the front lights?
Chris07LBNew Jersey · Oct 22, 2006#32 Originally Posted by ChinoCharles
I thought so... but the question becomes for a sloping headlight like on the Yaris how does it make any sense that a flat piece of vinyl would fit over it... I mean wouldn't it stretch around the curves and leave you with lighter spots and darker spots? I always wondered this.
*almost* had it perfect with a scrap piece of tint and my heat gun.
These kits are supposed to be even more flexible then standard window tint and "give" when going into corners and "slopes."
ChinoCharlesOH · Oct 22, 2006#33Alright, I'm sold. Its on my "cheap mods" list along with that grounding kit.
More questions...
(1) What would you need to install? I'm assuming a hard squeegie, maybe a heat gun and some alcohol or something to clean it off?
(2) Is it REMOVABLE. *big one
KatanaUnder the hood! · Oct 23, 2006#34I am thinking of buying them.
ChinoCharlesOH · Nov 7, 2006#35Ordered two 2'x1' lengths of vinyl from rvinyl.com today with a graphics squeegie. I'm going to be smoking the tail lights (I may cut out the center portion where the USDM tail lights are white) and the side markers, and if all goes well I will be following suit with the headlights... actually I might copy vodkalushes headlights, they look awesome. I'll do a DIY. It cost me a whopping 25 bucks shipped. Can't beat that.
Chris07LBNew Jersey · Nov 8, 2006#36 Originally Posted by ChinoCharles
Ordered two 2'x1' lengths of vinyl from rvinyl.com today with a graphics squeegie. I'm going to be smoking the tail lights (I may cut out the center portion where the USDM tail lights are white) and the side markers, and if all goes well I will be following suit with the headlights... actually I might copy vodkalushes headlights, they look awesome. I'll do a DIY. It cost me a whopping 25 bucks shipped. Can't beat that.
Take notes! 🤘
KatanaUnder the hood! · Nov 8, 2006#37Cool.
We are waiting for the pics and the DIY!
ChinoCharlesOH · Nov 13, 2006#38Vinyl came in today, and I've got the day off. WOOT! Another cool thing... rvinyl.com offers money off a second order in exchange for high-res pics of your install. A date with my buddy's 8 megapixel digicam is in order... I'll be using the discount for more vinyl for the headlights and a vinyl YW.com decal. 👍
I'll post the DIY in the approprate forum later on.
vodkalushRochester, NY · Nov 13, 2006#39you ordered the "vinyl roll" right, not the kit?
Chris07LBNew Jersey · Nov 13, 2006#40You could always let me use the discount for some tails....... buddy. 😛
ChinoCharlesOH · Nov 13, 2006#41Yes, I ordered two rolls of vinyl. Nothing special. The tail lights and side markers get smoked tonight... I just got back from getting everything I would need. Drop cloth, gloves, isopropyl alcohol, etc...
Chris, I'll let you know when I am going to order more vinyl for the headlights. I'm going to see if they will come WAY down if I put an rvinyl.com decal on the Yar.
Chris07LBNew Jersey · Nov 13, 2006#42 Originally Posted by ChinoCharles
Chris, I'll let you know when I am going to order more vinyl for the headlights. I'm going to see if they will come WAY down if I put an rvinyl.com decal on the Yar.
Lemme know, as I have been putting this off WAY too long already... it not, ill just drop them to the painter.
ChinoCharlesOH · Nov 13, 2006#43Oh god don't do that... just be patient. Who would want painted lights?
😉 I'm just kidding fellas, don't get all defensive now...
Chris07LBNew Jersey · Nov 13, 2006#44 Originally Posted by ChinoCharles
Oh god don't do that... just be patient. Who would want painted lights?
😉 I'm just kidding fellas, don't get all defensive now...
Well these would be done correctly the firs time. 😛
BMGYarisSouth Carolina, USA · Nov 13, 2006#45well post those pictures as soon as you can, im interested in how it looks.
ChinoCharlesOH · Nov 13, 2006#46Halfway through right now... tails and side markers are drying off from their alcohol bath. Soon, soon.
KSIbuckyFond du Lac, WI · Nov 13, 2006#47here some i saw
1 attachment not included in this copy
ChinoCharlesOH · Nov 14, 2006#48Oh, what a night!
OK, I'll begin by saying that this is the first mod I have attempted to do myself on this car... any car really for that matter. I took the dash off an Eclipse once, but other than that I'm not much of a DIY-er.
Having said that, I was REALLY geared up to get these lights smoked. I love the look, and I was excited to get there. Now that the entire situation is over, I can tell you three things.
1) There are lines and bubbles everywhere in my tail lights right now
2) I now know without a doubt how to do this perfectly
3) I only made one mistake
The one mistake was that I didn't bring a friend, because flat out, those tail lights are too angular to do this yourself. You need to stretch this film a whole bunch to get it over that big ridge on the tail light without any imperfections. In order to stretch it, you need to apply constant high heat. I found that 2-5 second intervals of heat from a run-of-the-mill hair dryer at about 6 inches was perfect. Ideally, you want to heat, stretch, squeegie, spray, heat, stretch, squeegie... etc. Throw taking pictures for a DIY in there and this is officially a two man job. Rvinyl didn't suggest the heating or the spraying of the adhesive surface either, those are just tricks I figured out through a little trial and a little more error. 😛 That being said, I'll at least give you guys what I have so far...
Excuse the poor quality images, camera phone...
Picture not included in this copy Stuff I used 2 2' x 1' rolls universal vinyl, 20%
Graphics squeegie
Blow dryer
LED flashlight (night install)
Spray bottle
10mm ratchet
Plastic drop cloth
Exacto knife
Gloves
70% isopropyl alcohol
MISTAKE:Using a plastic drop cloth for sticky vinyl was the stupidest idea ever... it was a nightmare any time the vinyl touched the surface.
Our first suspect, the side markers.
Picture not included in this copy Drivers side, with your fingertips toward the rear of the car, slide the entire piece toward the front of the car.
Picture not included in this copy While holding the marker forward, pull from the back and the clip should clear the skin. Then just pull her out.
Picture not included in this copy See that tab just below the wires?
Picture not included in this copy Push it and remove the harness.
Picture not included in this copy Next, tail lights. Start by removing the two vented panels in the rear. Just wedge the tip of a knife or a flathead screwdriver into the slot on the top of the panels and a little leverage will have them loose in no time. (Images of right tail light)
Picture not included in this copy This shot is looking up behind that panel into the rear of the tail light housing. You'll see two bolts on your left. They're 10mm. Remove those.
Picture not included in this copy Once those are off, the light will come out. They're stubborn though, so be a little careful. I had a lot more luck pushing them out from inside the trunk than I did pulling them out from the rear.
Once you have them out, remove the silver plastic panel on the back that has the parking/turn signal light in it. It just pulls off. The brake light bulb in the back screws to the left a quarter turn and pulls out as well.
9 attachments not included in this copy
ChinoCharlesOH · Nov 14, 2006#49In a spray bottle, mix two parts water to one part alcohol. Spray the lights... I mean douse them. Drown them. I sprayed the lights and wiped them clean with a lint-free microfiber towel probably a dozen times. You don't want any oils or dirt on the lights. It won't allow the vinyl to adhere. This is the same reason why you should use gloves.
Picture not included in this copy Picture not included in this copy OK, no pictures from here because, well, my hands were tied. Basically I spent 15 minutes trying to squeegie bubbles out of the tail lights. It wasn't happening... paralleling my original fears, the vinyl wouldn't bend over that huge ridge in the tail light without making a ton of bubbles. I tried a little heat (dryer on low) to no avail. Finally, I said screw it... at that point I was convinced this was going to be a total loss if not a good learning experience. I cranked the hair dryer to high and started stretching and was finally having some luck. The second light I did came out close to perfect. The side markers are perfect. The first light is a wreck, and even the second light has some bubbles, but again, it was a learning experience at this point.
The proper way to do this would be to have someone standing over you applying high heat to the vinyl at sporadic intervals. In the few seconds after the vinyl is heated, it is extremely flexible and can be formed to anything. A quick stretch with two hands, hit it with the squeegie and you're good to move on. A couple other imperitives are to spray both the adhesive side of the vinyl and the tail light
liberally with your alcohol/water mix often and to NOT work from the center out as you may be tempted to do right off the bat.
So for now, I roll around with my less-than-perfect install until payday on Thursday when I can order some more vinyl and try again. The nice thing is the vinyl was only 20 bucks, so it isn't like I broke the bank learning the hard way. The next install will be perfect. I'll be doing it next Monday, at which point I will post it as a DIY. For now its just a LITHWY (learn it the hard way yourself).
Here are some night preview shots of what it will look like. Since it was in pisspoor lighting and done on a low-res camera, you wouldn't know I screwed up. Haha.
Picture not included in this copy Picture not included in this copy4 attachments not included in this copy
hasher22Thread starterAustralia Sydney · Nov 14, 2006#50ooooooooooooooooooooooooooooooooo ya ya i like, since i cant see it very well. Tomrrow i expect some daylight high-res pics!! :)
Very nice tutorial, though i might make one for those who want to smoke spray them.....and steal some of your pics :P