Yarisworld Archive

Sway bar

14 posts · 8,267 views

chrisada_to2aOriginal postBKK · Aug 29, 2006#1
Just wonder if there any sway bar out for our car yet?

Replies 13

riceboyCAN · Aug 29, 2006#2
Lots of stuff is available check the vendors section..
Chris07LBNew Jersey · Aug 30, 2006#3
For liftback, I have seen the C-One carried by Supporting Vendor, John@BulletProof.
chrisada_to2aThread starterBKK · Aug 30, 2006#5
Cusco actually released a sway bar for a liftback already, at least they already got them in stock where i live (Bangkok, Thailand). I heard they are couple of 5 doors that already install it. I will most likely got one within a week or so. Thanks for the reply guys :D
BulletProofAutoGardena, CA · Aug 30, 2006#6
i'm sure they have but cusco usa doesn't release it until they have test fitted it.
AE86YarisWA · Aug 31, 2006#7
my yaris neede a rear sway bar yesterday and i didn't even own it then ;)

any idea if the Progress rear sway for the scion xa and xb will fit ?
johnnyfiveMilwaukee WI · Aug 31, 2006#8
with a rear torsion beam suspension, are you really going to see much gain by adding a rear sway bar?
Chris07LBNew Jersey · Sep 1, 2006#9
Be better off with a rear strut bar, or lower bumper bar.

Both offered by C-One, and pic's and prices on BulletProof's site above ^.
AE86YarisWA · Sep 1, 2006#10
Originally Posted by Chris07LB
Be better off with a rear strut bar, or lower bumper bar.

Both offered by C-One, and pic's and prices on BulletProof's site above ^.
strut braces mearly increase chassis rigidty

sway bars increase wheel rate on the inside tire in a turn thus helping rotation

i'd rather have the rotation than rigidity
Chris07LBNew Jersey · Sep 3, 2006#11
Originally Posted by AE86Yaris
strut braces mearly increase chassis rigidty

sway bars increase wheel rate on the inside tire in a turn thus helping rotation

i'd rather have the rotation than rigidity
Like already mentioned, good luck feeling much of a difference with the way our rear set up is.
03Z33SoCal · Sep 4, 2006#12
One of the best upgrades you can make to a VW Golf/Jetta is adding a rear trailing arm "sway bar" or "torsion bar". These are not your typical sway bar but are actually welded or bolted into the torsion beam to stiffen it up.

From looking at the Yaris beam, this can be easily made to fit, and I'll be looking into it soon. I also realize that it's important to keep some of the "flex" in the beam since it does help with steering and direction, but with the soft rubber bushes in the leading arm joints and the angle they meet up at, I'm sure a little stiffening can only help!

I'll see if I can find some pictures of the bar installed on VW's for reference.
heylookitsjamesRiverside CA · Sep 5, 2006#13
some of those MkII bars are pretty trick... some have sliding mount heim joints to minimize binding. It would be awesome to see some of that technology make it over to japanese cars... There is a company called Shine that makes a sway bar for the VW rear trailing arms that mounts above the arm and does not reduce ground clearance at all.
AE86YarisWA · Sep 5, 2006#14
Originally Posted by 03Z33
One of the best upgrades you can make to a VW Golf/Jetta is adding a rear trailing arm "sway bar" or "torsion bar". These are not your typical sway bar but are actually welded or bolted into the torsion beam to stiffen it up.

From looking at the Yaris beam, this can be easily made to fit, and I'll be looking into it soon. I also realize that it's important to keep some of the "flex" in the beam since it does help with steering and direction, but with the soft rubber bushes in the leading arm joints and the angle they meet up at, I'm sure a little stiffening can only help!

I'll see if I can find some pictures of the bar installed on VW's for reference.

right on nice to see someone doing something to make these things actually handle better

i've been trying to see if i can adapt a scion xA/xB rear sway bar since they hare basically the same supesnion setup, but first i got to find someone to let me look at there undercarriage 😁