For all you audio guys out there. How important is it that an enclosure be air tight. I built a custom enclosure (first time) and i doubt that its air tight. I wood glued at the joints, but do you guys use some kind of silicone or something to seal the joints. Also i was maybe thinking of fiberglassing over the box for a painted finish. Will it old up or will it seperate from the wood and start vibrating. Thanks
subwoofer box ?
2 posts · 5,239 views
Replies 1
a few things:
1. the box needs to be air tight
2. you can use silicone on the inside seams, just dont put the sub in, until you let the silicone sit for a day or 2 (some say the fumes from the curing silicone can deteriorate the surround on the speaker, and better safe, than sorry :) )
3: you sure can fiberglass over the outside of the box, and it will bond wonderfuly to the box, and will never seperate, but just a wanring, fiberglass is a PITA to get to a smooth finish for painting. (pretty much the reason why custom fiberglass box's are so expensive)
1. the box needs to be air tight
2. you can use silicone on the inside seams, just dont put the sub in, until you let the silicone sit for a day or 2 (some say the fumes from the curing silicone can deteriorate the surround on the speaker, and better safe, than sorry :) )
3: you sure can fiberglass over the outside of the box, and it will bond wonderfuly to the box, and will never seperate, but just a wanring, fiberglass is a PITA to get to a smooth finish for painting. (pretty much the reason why custom fiberglass box's are so expensive)