SlummyOriginal postD.C. 路 Aug 22, 2006#1hey everyone, looking for some info that i couldn't find thru search.
i found a LB @ a local dealer w/ cold weather package installed. i'd reather buy off the dealer lot, that way i can avoid the risk of a long wait...but i can't stand the Rear Bumper Protector.
any idea if it can be removed w/ a heat gun?
thanks in advance!馃檮
Replies 10
Chris07LBNew Jersey 路 Aug 22, 2006#2Im sure, as it goes on with sticky stuff on the backside.. I believe its just a peel and stick install.
If you get it off in one piece, ill buy it. 馃檪
SlummyThread starterD.C. 路 Aug 22, 2006#3thanks chris! i'm going to look @ one now! 馃憤
the one i refered to eairlier was sold as are most in my area.馃槧
but if the one i end up w/ has the protector i'll let you know.
OxyG3nEMontreal , Quebec , Canada 路 Aug 22, 2006#4if its like mine.. there is 4 long glue stick
SimmZQuebec 路 Aug 22, 2006#5Bumper protector are really good... I doesn't have one on my 2003 Cavalier and my bumper is all scratched up on top. Even just by rubbing grocery bad is enough to scratch the bumper.
I'll pay to get a bumper protector FOR SURE when I'll get my next new car!!
SlummyThread starterD.C. 路 Aug 22, 2006#6form over function, pure and simple.
johnnyfiveMilwaukee WI 路 Aug 23, 2006#7if your bumper gets scratched, just put one on before you go to sell it :)
ViolinNew Jersey 路 Aug 23, 2006#8The entire underside of mine was coated in sticky stufff - not just 4 strips.
TrancosRtS Florida 路 Aug 23, 2006#9I've been looking on Ebay for a protector and some yaris carpets, so I can't recommend it to remove it. I actually like the looks of it. It's a nice accent to the an otherwise "bland" section ofthe car.
IsLNdbOiLas Vegas, NV 路 Sep 17, 2006#10Is there a safe and easy way to clean the gunk that gets stuck around the edges of the bumper protector? It's getting kinda dirty around the edges and dirt seems to be getting up underneath the edges and sticking to the adhesive.
vodkalushRochester, NY 路 Sep 17, 2006#11its gotta be just like all other extertior acc./stick-ons have been (body taped on) even if it is "glued" on (which just means cleaning left over residue will be more "intense").
what you need:
heat gun or blow dryer
dental floss or fishing line
sticker/goo remover
Directions:
1. heat up the protector for a bit
2. use either dental floss or some 10-20pound fishing line
3. "saw" just underneith the protector
4. re-heat the proctor as needed to make removal easy
5. use some sticker/goo removed for an auto store and do a nice clean-up where the protector was.