just finished installing the df210 spring.. maybe it because of the bad qualite of the road here.. but when i hit BIG hole.. not normal hole it rub .. but i give a very nice loook :p maybe because of the tire.. 205/40 17
df210
23 posts 路 7,826 views
Replies 22
Well you said you hit a BIG hole... and you are now that much lower... what did you expect?? 馃し
damn that mean i have to drive with the eye on the road now lol
anyway very goood you how-to chris help me a lot! but took me 4 hours to change it hahah
Glad it was of some help. 馃榿Originally Posted by OxyG3nEanyway very goood you how-to chris help me a lot! but took me 4 hours to change it hahah
Can't wait to see your new pics with lowered car...
i looked and the tire 205 are too large .. they rub on the outside .. maybe i can find a way to fix it or leave it like that lol will see in a week the result.. if it going bad i put the stock coil ;p
Whats the offset of your wheels, and do they just rub on the inside of the fender well?
40 for the offset and they rub juste a little on the plastic on the inside maybe i can unclip it.. night was coming and couldnt work on that ;p
Do you guys think this drop will ever rub with the stock 185-60-15 on the car? Just wondering because it was very low!!
i dont think because first the stock wheel are a little smaller(diameter) than what ive put.. and mine are much larger..
becareful if you have rubbing issues... and make sure to get an alignment done... you don't want any premature or unusual wear on your tires...
doing the allingnement monday.. and anyway if anything happen with the tire
ill buy new one lol
ill buy new one lol
Here is the differences in the tires. You would be suprised at the small difference. I think its because the offset on the stock rims. Does anyone know what that offset is on the stocks?
185/60-15 4.4in sidewall 11.9in Radius 23.7in Diameter
205/40-17 3.2in sidewall 11.7in Radius 23.5in Diameter
185/61-15 74.6in Circumference 850 Revs/Mile
205/40-17 73.7in Circumference 860 Revs/Mile
185/60-15 4.4in sidewall 11.9in Radius 23.7in Diameter
205/40-17 3.2in sidewall 11.7in Radius 23.5in Diameter
185/61-15 74.6in Circumference 850 Revs/Mile
205/40-17 73.7in Circumference 860 Revs/Mile
i had 14 inch rim stock with 175/65 tire on
No rubbing here... DF210'sOriginally Posted by SimmZDo you guys think this drop will ever rub with the stock 185-60-15 on the car? Just wondering because it was very low!!
1 attachment not included in this copy
Here is the tire calculator I use. Just put both the old tire size and the new tire size and they compare them.
http://www.eunos.com/tirecalc/
http://www.eunos.com/tirecalc/
Hey Chris do you have any idea what the offset is with the stock wheels on the 185/60/15's. We were worried that +40mm wouldnt be enough and now it seems to be too much. I have 215/40's on with a +40mm offset and I took it to a friend of mine that does suspension work and he said I should be ok from rubbing.
im gonna have to put the NF ... i took the worst street of my city and i almost cut the tire ;p so im gonna keep it 1-2 week and order the nf
who know the drop difference between the df and the nf?
DF= 1.6 inches in the front and 1.8 inches in the rear
NF= 1.1 inches in the front and 1.3 inches in the rear
Pics with DF and NF on a Hatchback are on www.tanabe-usa.com
NF= 1.1 inches in the front and 1.3 inches in the rear
Pics with DF and NF on a Hatchback are on www.tanabe-usa.com
oki thanks :p i shoud be good with the nf210.. anyone want df210? hahah
FYI - my DF210's dropped me over 2" once settled. Follow my How-To, and MEASURE before and after to get your number!