Yarisworld Archive

My new wheels..

31 posts · 7,947 views

riceboyOriginal postCAN · Jul 25, 2006#1
Sorry that the car isn't washed.. in case anyone is wondering they are 6 spoke BSA's Black w/ Polished Lip and 205-40-17 General Tire UHP's

Replies 30

johnnyfiveMilwaukee WI · Jul 25, 2006#2
looking good, how about a close up of the rims? :)
ChinoCharlesOH · Jul 25, 2006#3
IMHO the rims these cars were meant to sit on. Black w/ polished lip. Hot.
Ran KizamaCanton, GA · Jul 25, 2006#4
Nice man! Where'd you snag the sideskirts? Toyota?
fnkngrvIn The Hotbox · Jul 25, 2006#5
That is with the stock suspension? How much did the bill come to with the wraps?
riceboyThread starterCAN · Jul 25, 2006#6
johnnyfive - Close up.. see below.. not sure if the image quality is going to be crappy but I'm too lazy to go downstairs to take more pics.. I did find something off the net but it's not colored properly.. The model is BSA 354

ChinoCharles - Thx! 👍

Ran Kizama - The sideskirts came stock w/ the RS model

fnkngrv - It's been lowered with the Toyota lowering springs, and the bill came to $1100 all in..
Ran KizamaCanton, GA · Jul 25, 2006#7
$1100?! Is that Wheels, Tires, and Springs? 😕
fnkngrvIn The Hotbox · Jul 25, 2006#8
Originally Posted by Ran Kizama
$1100?! Is that Wheels, Tires, and Springs? 😕

I would hope so!


anyway....that looks really sweet. I wonder how they would look on my S....😎
jdgriswaldBellingham, WA · Jul 25, 2006#9
Originally Posted by Ran Kizama
Nice man! Where'd you snag the sideskirts? Toyota?
It's an RS.....those lucky Canucks.
07WYarisRSRidgeway Ontario · Jul 25, 2006#10
Very nice
I'm almost bought some rims that look just like that but charcoal/grafite color
Chris07LBNew Jersey · Jul 25, 2006#11
Originally Posted by jdgriswald
It's an RS.....those lucky Canucks.
But he's from California... so what he's asking is where did he get them.

I am VERY interested to know as well.

Imported them from Canada? Found someone selling off their RS Yaris?

🤷
spacemanoeuvresBucks County, PA · Jul 25, 2006#12
Originally Posted by Chris07LB
But he's from California... so what he's asking is where did he get them.

I am VERY interested to know as well.

Imported them from Canada? Found someone selling off their RS Yaris?

🤷
I think the CA stands for Canada...?
riceboyThread starterCAN · Jul 25, 2006#13
Sorry folks.. I messed up my profile from DAY 1.. the CA should be CAN.. sorry for the confusion!
ChinoCharlesOH · Jul 25, 2006#14
I was about to say group buy on Canadian RS side skirts, and then I realized that I would have to paint them because they don't have them with USDM colors. I hate my life.

Still though, for the rest of you, someone set that up. Those look nice.
bdiuVancouver · Jul 25, 2006#15
Looks good. Your rims are somewhat like mine
bulldogs2kVa Beach · Jul 26, 2006#16
those rims are nice!
TRD_YarisAustin, Texas · Jul 26, 2006#17
Originally Posted by Ran Kizama
Nice man! Where'd you snag the sideskirts? Toyota?
Clean Sideskirts!!
I like the wheels, too..looks good on white. Chris07LB will be all over that 😆
Chaad32USA · Jul 26, 2006#18
Originally Posted by riceboy
Sorry that the car isn't washed.. in case anyone is wondering they are 6 spoke BSA's Black w/ Polished Lip and 205-40-17 General Tire UHP's
What % of tint do you have?
riceboyThread starterCAN · Jul 27, 2006#19
The tint is 35% all around, and the wheels are 17X7/4x100/40mm, no rubbing issues whatsoever... When I was talking to my wheel guy, he advised that a max of 8 inch width could be installed.. 7.5 with no rubbing... dunno if he was just blowing smoke.. but if you want wider.. it might be available..
ChinoCharlesOH · Jul 27, 2006#20
Anyone else know anything about a max wheel width? What if you have the TRD springs?
riceboyThread starterCAN · Jul 29, 2006#21
I don't believe the trd springs affect the max width you can use for wheels...
Chris07LBNew Jersey · Jul 30, 2006#22
Originally Posted by riceboy
I don't believe the trd springs affect the max width you can use for wheels...
It does if your dropped over 2", which I dont believe the TRD's do anyway.
ChinoCharlesOH · Aug 4, 2006#23
Naw its 1.75" I believe, but don't quote me on that. If I wasn't so lazy I'd find out just for the sake of this post, but guess what... mwahaha.

It doesn't matter anyway, I'm too poor for any of this crap right now.
OxyG3nEMontreal , Quebec , Canada · Aug 5, 2006#24
i have 17inch x 7 with 205/40 tire.. and there is too much space :p but with 7 in mag it because harder to drive ... cant think about 7.5
Jem_hadarCollingwood, ON · Aug 13, 2006#25
Originally Posted by riceboy
Sorry that the car isn't washed.. in case anyone is wondering they are 6 spoke BSA's Black w/ Polished Lip and 205-40-17 General Tire UHP's
Those rimms are seriously nice w/ teh white Yaris! NICE
riceboyThread starterCAN · Aug 14, 2006#26
🤘

Thanks.. I think it's a decent little combo...
RobbIA · Aug 27, 2006#27
looks great, I wouldn't change anything.
dngzvancouver · Aug 28, 2006#28
how heavy are your rims?? do 17''s make a big diff off the line?
riceboyThread starterCAN · Aug 28, 2006#29
Thx Robb... the rims weight?? I'm not sure.. has it made a big diff.. not really.. It's slower, but the car was slow to begin with... Did it bog it right down, and make it noticeably slower? absolutely not.. with this car you can get the lightweight wheels, but I think that it all comes down to personal preference.. hence the variance in wheel sizes from 14" to 20" depending on the owner.
RSboyzVancouver · Aug 28, 2006#30
[QUOTE=fnkngrv - It's been lowered with the Toyota lowering springs, and the bill came to $1100 all in..[/QUOTE]


$1100 all in does that include tires and cdn tax? bcuz im planning to put black rims on my white 5-door hatch but i havent really look around for rims. thanks for your info. 👍
Yaris YabaThailand · Aug 29, 2006#31
Those rims really match your color and tint!! good choice🎉 🎉

They sorda look like TE37's