I installed a glowshift 2" tachometer yesterday and all was going well until i started it up. I immediately new something was wrong. It read that the car was idling at like 300 rpm's. I drove around and it just didn't feel right. It seemed to be registering about 3/4 of what the rpm's should have been. I tried to bring it up to close to redline 馃し and the darn thing pegged the rev limiter at 4k rpm's. Yes, i do have it set on the 4 cylinder selection and i attatched the green wire exactly where the other guy did in the DIY post. Please help, this is really annoying me!!!
HELP tachometer problems!!!
17 posts 路 6,921 views
Replies 16
well after a little surfing on the net i discovered that an insufficient voltage can cause inaccuracies. I brought out the old volt meter and sure enough that was the case. Found a better supply and it is now accurate.
glad you figured it out
Could you post a link to the tach you purchsed and installed?
don't know about him but this is the one i have in my car http://www.glowshiftdirect.com/index...ROD&ProdID=193
Do you have to adjust the color everytime, or does it have a preset memory?Originally Posted by eight_headsdon't know about him but this is the one i have in my car http://www.glowshiftdirect.com/index...ROD&ProdID=193
Captain, eight heads' link is the same one i got. chris, it does have a memory for the last color that was selected.
Thanks Sam. 馃檪Originally Posted by SamDaYarisManCaptain, eight heads' link is the same one i got. chris, it does have a memory for the last color that was selected.
Thanks.
SamDaYarisMan are there any photos as I am wanting to put a tacho in my Yaris and would like to see the final product.
Heres a picture of the tach. Sorry about the low quality. I only had one chance to take a pic before the batteries died. I'll have to buy my own camera one of these days. If you guys are wondering about the non oem buttons on the arm rest...They are my aftermarket power window buttons. Also the gauge mount i found is pretty neat too..it has a swivel ball that enables it to be positioned however you want it, but it is also nice and tight so it doesnt move when i hit bumps.
1 attachment not included in this copy
Can you order a new instrument panel for a sedan with a tach from Toyota? Then swap it out with the existing one for a latchback? Your tach looks good and professionally installed, but it's a little aftermarket for my taste.
Originally Posted by SamDaYarisManHeres a picture of the tach. Sorry about the low quality. I only had one chance to take a pic before the batteries died. I'll have to buy my own camera one of these days. If you guys are wondering about the non oem buttons on the arm rest...They are my aftermarket power window buttons. Also the gauge mount i found is pretty neat too..it has a swivel ball that enables it to be positioned however you want it, but it is also nice and tight so it doesnt move when i hit bumps.
Did you by any chance used this Universal Pod for your installation?
http://www.glowshiftdirect.com/index...PROD&ProdID=86
i may be wrong, but i believe the casing/housing design is different for the sedan and liftback instrument clusters, so we cant just swap them. i was actually thinkin of gettin a jdm or euro liftback cluster with the tach and do a simple swap, but then i realized i didnt want to do km/h to mph conversions in my head ALL THE TIME! maybe i should do it and just tape up a little "miles to kilometers" conversion chart on one of the many nifty glove compartments.Originally Posted by costaricandreamsCan you order a new instrument panel for a sedan with a tach from Toyota? Then swap it out with the existing one for a latchback? Your tach looks good and professionally installed, but it's a little aftermarket for my taste.
--B
hey guys,i got a 2inch tacho too, i ve read the DIY tach install thread,but i still don't get it,there are 4 wires on my tacho(red,black,green,orange), i know where the red and black go,but i don't know where the orange and green to be linked,anyone can post picture and show me,and i believe the orange one is something like linking to the dimmer light?but where is the dimmer light connection???and where is the green one going ??and what equipment do i need to link those wires?
sorry about those noobie question
sorry about those noobie question
They need an aftermarket tach kit that pops into that stock opening. I'd buy one! It seems like it would take 5 minutes to install too.
where to buy?show me plxOriginally Posted by funkstrongThey need an aftermarket tach kit that pops into that stock opening. I'd buy one! It seems like it would take 5 minutes to install too.