BrownNBubblyOriginal postMiami, FL · May 9, 2006#1alright, if there is no tach (liftback), would you be able to figure out when the car redlines? if i do actually get the car (under the hands of parents decision), this will be my first manual car. but since there is no tach, something tells me i may have a problem knowing when to shift.
yea i know you can feel/hear when to shift , but will a newb like me really know when? thanks for the info.
Replies 17
evolutionist03Fort Lauderdale · May 9, 2006#2You will, specially on an engine of such size! The sound will be the best help!
IdjiitHolly Springs, NC · May 9, 2006#3You will know, don't worry about it. Just don't drive it like a maniac during break-in (*cough*) and drive it so your shifts to 2nd are smooth. The engine isn't going to blow up if you redline every once and a while.
why?harnett county NC · May 11, 2006#4I also agree that you will be fine. Just listen to the engine and the way the car feels.
boxerboyNorth Carolina · May 12, 2006#5You will be fine, you will learn quickly.
BrownNBubblyThread starterMiami, FL · May 12, 2006#6thats good to know that it wouldn't be a problem, thanks! now the only thing standing in the way of me getting a yaris is the fact that i just got a car a year ago. x.x
Yaris rules! even if i dont get one!
CalidrifterChatsworth and Fontana · May 17, 2006#7If you read the owners manual it will tell you what mph to shift at sometimes, well at least it did in my 240sx's owners manual.
ChickonNew York · May 17, 2006#8That might not be a pretty good idea unless you're very used to Manual Shifting.
Most engine can handle higher than factory pre-set redline limit at least 1.5K Rpm. but redlining every so often is not that good idea. Especially 1NFZ engine.
Me for example, I dont even look at the Tacho in my 8 most of the time, Unless I have to go fast, plus my 8(most cars would) will *beep* when I reach 9K redline *but I still upshift around 9.5K*.
Just follow the manual and upshift when it hits the speed. and install a Tacho meter asap.
riceboyCAN · May 17, 2006#9no real need for tach.. unless you're running the car hard... you can pretty much tell by sound...
Jem_hadarCollingwood, ON · May 17, 2006#10 Originally Posted by Calidrifter
If you read the owners manual it will tell you what mph to shift at sometimes, well at least it did in my 240sx's owners manual.
My Yaris manual (Canadian) tells you in MPH and km/h the "ideal" shift speeds.
I think they were (in km/h)
2nd - 24 km/h
3rd - 40 km/h
4th - 64 km/h
5th - 74 km/h
(^^ thats for gearing up)
Gearing down from 5th to 1st, they wer
4th - 65 km/h
3th - 65 km/h
2nd - 40 km/h
1st - 24 km/h
(^^ Yea, gearing out of 5th and 4th was the exact same speed... first manual, so I dunno if thats usual or not... because its like u dont even need to hit 4th if you're gonna gear down sequentially...)
Im almost positive those #s are right, or very close! ... id have to double check though
Jem
derekjdBuffalo · May 17, 2006#11Here in mph:
UP
2nd --- 14.913599999999999
3rd --- 24.855999999999998
4th --- 39.7696
5th --- 45.983599999999996
DOWN
1st --- 14.913599999999999
2nd --- 24.855999999999998
3rd --- 40.391
4th --- 40.391
IdjiitHolly Springs, NC · May 17, 2006#12 Originally Posted by derekjd
Here in mph:
UP
2nd --- 14.913599999999999
3rd --- 24.855999999999998
4th --- 39.7696
5th --- 45.983599999999996
DOWN
1st --- 14.913599999999999
2nd --- 24.855999999999998
3rd --- 40.391
4th --- 40.391
Bwaahahahhahhaha. Yeah, okay, whatever. I typically shift into 3rd going about 55mph. ;)
Jem_hadarCollingwood, ON · May 17, 2006#13 Originally Posted by Idjiit
Bwaahahahhahhaha. Yeah, okay, whatever. I typically shift into 3rd going about 55mph. ;)
I dont follow those speeds to a T either, I listen to the engine and check the RPMS...
usually, im in 2nd aroud 20 km/h, 3rd at 40km/h, 4th at 60km/h and into 5th around 80k/km
CalidrifterChatsworth and Fontana · May 17, 2006#14 Originally Posted by Idjiit
Bwaahahahhahhaha. Yeah, okay, whatever. I typically shift into 3rd going about 55mph. ;)
Doesn't everyone?
CalidrifterChatsworth and Fontana · May 17, 2006#15 Originally Posted by Thirty-Nine
Those numbers are to achieve ideal fuel economy, I believe.
Which means that its at about 3k on the RPM so double the amount for performance.
why?harnett county NC · May 18, 2006#16No. lol.
Jem_hadarCollingwood, ON · May 18, 2006#17 Originally Posted by Thirty-Nine
Those numbers are to achieve ideal fuel economy, I believe.
Aye, it states as much in the manual.
The best compromise between fuel efficiency and power I think it was ;)
Jem_hadarCollingwood, ON · May 18, 2006#18 Originally Posted by Thirty-Nine
It shouldn't be a real problem, although it'd be nicer if the car did have a tach.
Thats the crutch of the matter -- really doesn't matter, but a very nice thing to have regardless!
Jem