Yarisworld Archive

Engine mods - why bother?

142 posts · 70,485 views · page 1 of 3

RallyYarisOriginal postCanada · Apr 20, 2006#1
I have been interested in super/turbocharging a Yaris. However, I have read that the engine will not be able to handle any appreciable extra horsepower without internal mods. So why bother getting CAI, exhaust mods, etc. if it will only add up to about 5 hp increase? It seems it will cost a lot of money to get the Yaris into the 150 hp range.

I guess I need to decide whether or not I want fuel efficiency or power. I wish they would put a slightly larger engine that could handle a turbo. 😢

Replies 141

IdjiitHolly Springs, NC · Apr 20, 2006#2
Supercharging it up to around 130-140hp combined with chopping off a lot of weight (which would be pretty easy) should give you a pretty decent power-to-weight ratio. What sort of ratio were you looking for?
RallyYarisThread starterCanada · Apr 20, 2006#3
140 hp would be great, but I would seriously worry about the reliability of the motor. Wouldn't you need to get stronger internals to keep up with the extra power?
jcoveBrampton, Ontario, Canada · Apr 20, 2006#4
Originally Posted by RallyYaris
140 hp would be great, but I would seriously worry about the reliability of the motor. Wouldn't you need to get stronger internals to keep up with the extra power?
Anything more and you would, but 140 should be fine from what I've been reading. Check out the thread on the Blitz.
birdydenton,tx · Apr 20, 2006#5
i think with this motor just get intake exhaust and header and be done with it and then get coilovers, sways and kick ass
why?harnett county NC · Apr 20, 2006#6
Any type of serious adding of power, like forced induction, will shorten engine life.

The choice is always between mpg or hp.

However, a new intake, a full exhaust system, lightened flywheel, etc, things that will free up hp by removing restrictions and weight should not shorten the life of the engine.
AutoTech1Farmington NY · Apr 27, 2006#7
Originally Posted by why?
Any type of serious adding of power, like forced induction, will shorten engine life.

The choice is always between mpg or hp.

However, a new intake, a full exhaust system, lightened flywheel, etc, things that will free up hp by removing restrictions and weight should not shorten the life of the engine.
You can about cut your engine life in half with forced induction... Maybe more. With the yaris, I wouldn't even think about forced induction, unless you have the money for internal upgrades.

I like the idea of less wieght. Less rotating mass on the crank. Decreasing wieght and rotating mass is about the best modification anyone can do for a car, and it is often over looked. It does not destroy the engine. If anything, getting lighter parts are just that. They are lighter, but weaker. You're better of breaking a flywheel than a few pistons or rods...

The yaris can be a very agile car if it's balanced the right way with modifications. In a car like this, I'd shave lbs, perform bolt ons and do whatever it takes to increase power without turbocharging/supercharging. I'd also correct the suspension and brakes. But I'd end up writing a good amt. There are many ways to gain power... Not only through forced induction or giggle juice (nitrous, alcohol, Co2 etc).

If I bought this car though, the best bet would probably be to machine the engine. Send it to a private shop. N/A modifications are always great. They are just costly as well. :-P I wish I could say more, but that's all I can think of off the top of my head, since it's only my first year of Auto Tech so I only know so much. :-)

But remember this. If you perform a good amount of N/A modifications, you may want to consider crossing over to Forced Induction afterwards... This gets crazy with explaining, but you have no clue how many ways you can get power from a car.
AutoTech1Farmington NY · Apr 27, 2006#8
Originally Posted by Sp33dY
i KIND OF AGREE. Spend the cash on suspension if anything ..... if it cant go fast in a straight line, make it go fast in corners!
This car is good for that stuff too. Nice input. ;-)
AutoTech1Farmington NY · Apr 27, 2006#9
Originally Posted by Sp33dY
Not necessarily true.
Keep studying .... you have a lot to learn .
I'll place a bet saying lighter parts can be weaker. In most cases they are weaker... But where they are weaker, they are stronger somewhere else... Everything has it's advantages and disadvantages...
IdjiitHolly Springs, NC · Apr 27, 2006#10
Originally Posted by AutoTech1
I'll place a bet saying lighter parts can be weaker. In most cases they are weaker... But where they are weaker, they are stronger somewhere else... Everything has it's advantages and disadvantages...
Of course lighter parts can be weaker. But usually aftermarket parts aren't. They're just made out of materials that are prohibitively expensive for a company like Toyota to put in a car that retails for $11,000. And of course some of these parts trade off performance for ultimate drivability.
why?harnett county NC · Apr 27, 2006#11
Lighter parts are not weaker. That would be stupid.

F1 parts are the lightest parts any vehicles use. They are also some of the strongest. F1 engines spin to 20,000 or so rpms.

It will cost more money, but it would be worth it. Every pound you can take out of a car means better gas mileage, handling, braking, acceleration, etc.

And the best thing is Yaris engines only make 106 hp. I bet it would be hard to find a part too weak to handle Yaris like power.
AutoTech1Farmington NY · Apr 28, 2006#12
Originally Posted by why?
Lighter parts are not weaker. That would be stupid.

F1 parts are the lightest parts any vehicles use. They are also some of the strongest. F1 engines spin to 20,000 or so rpms.

It will cost more money, but it would be worth it. Every pound you can take out of a car means better gas mileage, handling, braking, acceleration, etc.

And the best thing is Yaris engines only make 106 hp. I bet it would be hard to find a part too weak to handle Yaris like power.
Ok. Before you jump ahead, let me point out, which I might not have, that I did not say "All light parts are weaker." That statement would be completely false. When you are looking into many interior components within the block, and you are going in the direction of racing, you can't simply be paying more for parts when they are not any stronger. These parts will be stronger. And more often, they'll be forged over their stock counterparts proving your argument true. A lot of internal parts are built strong, because it's torque that deals a blow to anything in the block, which is why aftermarket parts are made stronger for the engine. And when you force more air into the engine, this increases torgue; that is, if you are adding the right amount of fuel to get the best stachiometric ratio for performance.

As for some other things, take a flywheel for example, it is not built in mind for as much of a strength purpose. It's basically to decrease rotating mass. And you may wonder why? Well, if you decrease rotational mass, you decrease resistance and you free up tiny amounts of horsepower. Consider this... You can rotate a crank from nascar with two fingers... Could you ever do that on a yaris or a stock car of any kind that is not dedicated to a race track? Probably not. Kind of like what N/A modifications aim to do. Now that's not to say, that they (flywheels) aren't stronger than stock counter parts. They most likely are. But these parts are made for lighter wieght purposes and you can still break them under a lot of stress/torque.

And take a drilled rotor for example, to prove me right. Drilled rotors do nothing for stopping purposes. They are drilled to reduce wieght. With these drilled holes, they make the rotor weaker... Which is why you have to ask yourself, why even bother getting drilled rotors for a street application? Many do it. Now that's not to say again, that they aren't stronger than stock components. Most often than not, they are... But they are still weak... And that's what I'm saying. Anything that aims for a lighter wieght purpose only, is going to be weak... "Torque fighting modifications" will be stronger though... But keep in mind, everything is only stronger to a certain point.

Which brings me to an interesting fact. Bolt grades. To get a point across, some bolts are built weaker on purpose. Take a lawn mower or a machine of comparible size with the same purpose. Let's say that your blade binds up. Some of these machines have weaker bolts connected to this blade, so that you break the bolt, and not the blades... In other words, break a small thing to protect a large investment. And for other applications you have stronger bolts... For the obvious fact that you don't want the bolts to break.

Any you're right. The Yaris can't break too many things yet with the torque it makes. It's not so much hp... But torque that kills an engine... I was talking about higher powered cars... But still, I wouldn't run forced induction on the Yaris, unless you consult a professional and get the right parts to rebuild an engine before doing so.
AutoTech1Farmington NY · Apr 28, 2006#13
Originally Posted by Idjiit
Of course lighter parts can be weaker. But usually aftermarket parts aren't. They're just made out of materials that are prohibitively expensive for a company like Toyota to put in a car that retails for $11,000. And of course some of these parts trade off performance for ultimate drivability.
Or they trade off drivability for performance. Or they trade off reliability for performance... Or they trade off life for performance and so on and so fourth. I have to agree with you. And that's what I was trying to say. Not all lighter parts are weaker. But some are. And some can be... But it depends on how you look at it. I can say, they are stronger and be right, or I can say they are weaker and be right... Depends no how you look at it. Everything has it's weakness and it's strength...
C2AUTOSPLLoma Linda, CA · Apr 29, 2006#14
Market rightnow is very small for the Yaris. We'll see what the future holds.
YarisHatchBlank · Jun 6, 2006#15
Its all about power to weight. On a 2,200lbs car, 110whp is going to produce acceleration much differently than a 3,000lbs car. People get too caught up on dyno numbers that they loose sight of what car those numbers are on.

Also, when boosting any original n/a motor, its always best to upgrade the internals no matter what psi you plan to run on in terms of daily. Because in the end, you'd rather over-build the motor/tranny than underbuild. At least, thats the way i think.
SnakeNew York · Jun 6, 2006#16
if you want any real power on the yaris, just drop in a 2zz (1.8) motor from a celica or
a 2AZ-FE 2.4 from a scion tc, the stock yaris motor is not really good past 170 crank hp on boost without heavy internal block work

if you guys look into it, these swaps should really not be that difficult and they are inexpensive enough to find at a junkyard, plenty of aftermarket turbo kits for both motors with the celicas and tc's running around
YarisHatchBlank · Jun 6, 2006#17
Originally Posted by Snake
if you want any real power on the yaris, just drop in a 2zz (1.8) motor from a celica or
a 2AZ-FE 2.4 from a scion tc, the stock yaris motor is not really good past 170 crank hp on boost without heavy internal block work

if you guys look into it, these swaps should really not be that difficult and they are inexpensive enough to find at a junkyard, plenty of aftermarket turbo kits for both motors with the celicas and tc's running around
^Prime example of what i was saying earlier, its not about the numbers. And zpi has pushed 181whp on their 8psi turbo kit, they have been running it hard the past 8,000 miles without any trouble. Its possible to make decent numbers if thats what your after.

The 2az is crap. The internals are a joke on it, it would also cause the yaris to have a very uneven weight dist. with that much weight added to the front end. Also, the 2zz is a better n/a motor than a boost motor. Not to mention, the transmission on the 2zz is seriously weak. One mis-shift on a boosted motor and you will cause minor to significant damage. Its been proven in the past with celicas. While i'd love to see a 2zz in the yaris as well, that transmission is a no no. N/a, you can make some good power out of it if your willing to take the time, and money to invest naturally aspirated vs. throwing down a few thousand for some easy power.

Another thing you might want to realize when you talk motor swaps, the yaris engine bay is pretty small. Its smaller than the xb's, and a 1.8l can fit in the xb but without some adjustments to the firewall. Putting a 2.4l would be a huge project, can be done but wouldn't be easy. Also wouldn't be practical because with the weight added, it would handle like crap and can even be dangerous, especially in the rain.
SnakeNew York · Jun 6, 2006#18
this is why they have 2az's with internal race mods pushing 540+fwhp on scion tc's
lol
all the 2zz needs is a set of 9:1 comp ja pistons, and you can run all the boost you need
anything can be done, if you know what your doing
if I could push 600+hp out of a neon, im sure u guys can play a little bit with a yaris and actually get a little bit of power so leave all options open to play
just need some proper fuel management and tuning so you dont blow your shit up and some $ for a good setup
YarisHatchBlank · Jun 7, 2006#19
Originally Posted by Snake
this is why they have 2az's with internal race mods pushing 540+fwhp on scion tc's
lol
all the 2zz needs is a set of 9:1 comp ja pistons, and you can run all the boost you need
anything can be done, if you know what your doing
if I could push 600+hp out of a neon, im sure u guys can play a little bit with a yaris and actually get a little bit of power so leave all options open to play
just need some proper fuel management and tuning so you dont blow your shit up and some $ for a good setup
Yes, the 2az can produce numbers well but they have a ton of issues with boost early on boost life. Also, the motors you see that are 550whp+ are hardly counted as a 2az, infact jotechs 600whp tC doesn't even have a 2az in it. The most i've seen with an actual 2az is around 350whp, which yeah thats impressive but i've seen more than enough evidence of the 2az not worth it. Not to mention, i have personally seen the 2az broken down and the internals are pathetic. 😲

And as i said before, all that extra weight on the front of the yaris would kill a daily. heh
wlfpckChicago · Jun 13, 2006#20
i say just modify the xb turbo and strengthen the engine. It should hold up to 8psi? strengthen it a little and get it running at 14psi and u should be set. Of course... you could be very original and go like 34 psi. but don't blow up. 🙂
fnkngrvIn The Hotbox · Jun 27, 2006#21
Nothing against what everyone is attempting to suggest, but maybe you are all thinking too modern. Has anyone considered a 4e-fte yet? When you take a look at what that powerplant has done for the starlet/tercel/paseo, then when you really bounce the costs of using the current 1zz or even the powerplant out of a tC then how can they compare? There have been people that have been able to push 300 horse out of the 4e and have been very happy with how strong the whole setup is plus the times/numbers. You don't have to push 500+ horse to have a tight ride...that would be for someone that doesn't know how to work behind the wheel ;) Sure you have to pick up more parts, but I am willing to wager that you might be looking at 5k for a good solid setup with the newer options ya'all keep talking about. For that kind of flash you can do all you need with the 4e and prolly have a little left over. The biggest hurdle I would see is the front wheel drivetrain and the wire harness, but that can be achieved....just look what BYP has done for example with a 4e in a Tercel? Before someone says it I am fully aware that the 4e is a direct bolt-in on the 'cel...I have a 96, but this still must be abel to be done with some old fashioned ingenuity. Just some food for thought. Once I am done with my 66 Honda 305 motorcycle that is what my next project may be...👍
weeze-dogOhio · Jun 28, 2006#22
Take the $4,000-$5,000 you are going to spend to TRY to get 130-140hp and buy a used V8 mustang or camaro with 300hp and be done with it. This is a 2nd gen ECHO ecnobox not a sports car. The only fast things on the road with 100hp are called m-o-t-o-r-c-y-c-l-e-s.....


Edit: seriously if you going to spend that $4-5K in mods just buy a mini cooper S instead of the yaris.
BatesKingston · Jun 28, 2006#23
I just joined this forum. I bought a Yaris an hour ago, I still don't have.

Brake rotors are drilled to let the gas, produced by the heat in the pads, escape into the vented center section, otherwise the gas can produce an unwanted pressure in the wrong way, holding the pad from the rotor surface. Keep reading 😉

I'm with weeze-dog, I bought this car cause my 89 5.0L sucks too much gas and has a tendency to break down. now I'm forced to make it into a track only car 😁
weeze-dogOhio · Jun 28, 2006#24
I had a 92 5.0 Mustang 5-speed in 2001-2003 as a fun car. I paid $4200 for it and it had a rebuilt motor, off road exhaust, and was already lowered. That thing was a beast, I loved that car. 350ft-lb of torque! Also had an ecno geo as the daily driver.
Got rid of the mustang cause I found the large amounts of HP causes you to do stupid things like drag racing, burnouts, and modding (HP is addicting).
I swear every honda with a fart can always wanted to race me. And like George Bush in a spelling bee, they didn't have a prayer 😁
mikeukrainetzCanada · Jun 28, 2006#26
thats about the coolest thing ive ever seen...
weeze-dogOhio · Jun 29, 2006#27
Pluuuuulllllleeeeeeaaaaaseeeee, 13.40 quarter mile in a Ferrari F430? He obviously can't drive, cause that is HORRIBLE. A stock late model camaro can do 12.90s with just an exhaust and a good driver. He bogged it off of the line bad.

For the record road and track got 11.7 in the quarter mile in their F430.

Link

I believe they say every tenth of a second is one car length, he should have been 15 car lengths ahead easy. Guy in the smart better be glad he didn't wreck cause that thing was gutted so much it had the strength of an aluminum can.

You want to see impressive, watch the video of the turbo mini-van pulling a wheelie off of the line and beat a V8 transam. Now that was impressive. Too bad I can't find that old video anymore.

Edit: Ah Ha, here's one of the videos. This van runs a 12.65 in the quarter, better than the ferrari and smart car by almost a second. Now THIS is impressive.

Turbo Mini-Van
bullitt3570Portland, Maine · Jun 29, 2006#28
Hey....To all of those involved in this ongoing debate....I'll say a few things and ask a couple of others...Because I certainly don't have all the answers. First of all, any car with modern technology and manufacturing standards( especially from Toyota) Should be able to handle a modest boost. Do all the comments by supposed experts about the Yaris "internals" not remember the most tuned car in America is a lowly previous generation civic. Jackson Racing bolt on supercharger anyone? Now is there a loss of duribility/reliability from this? Invariably, but Toyota reputation for bullet proof drivetrains seems to exceed that of the more advanced (i.e. Vtech), yet slightly more delicate powerplants from Honda. Anyway...internals aside...How about a low boost supercharger, intake, exhaust, coilovers, and remaping the ecu when all is said and done. Risk yes...Reward definately. Anyone who says go by a new GTI with 200 hp is missing the point. There is conservatively 5 grand in this approach, but as I have learned from other such projects,,,None of which have blown up,,,,You can do it in steps and thats half the fun.😁
mikeukrainetzCanada · Jun 29, 2006#29
I agree 100%. You can moderately boost the stock Yaris and will definitely holdup, not talking 6-8psi though. I dont understand this longevity idea though, why would stock cars have turbos and superchargers if the engines dont last? mind you they are designed at the onset for boost. Provided you drop the compression from 10 - 10.5 to at least 9 and with 3-6psi things should be great. I cant imagine at 150 thousand miles youll still be driving the car like you stole it so whats the big deal if theres some wear and tear at that point?
Ive built some hardcore NA chevy motors, mostly from the 70's and 80's so I have little to no experience in boost.
Has anyone here actually built an engine? or are most folks in the forum old enough to remember carbed engines or were you still in diapers when efi came out big in the eighties?

Still, at three grand for a turbo kit that at 3-6psi will only net you like 30-40hp on the Yaris seems like an expensive mod - makes the power to weight kick ass so maybe it evens itself out....
weeze-dogOhio · Jun 29, 2006#30
I'm just arguing the the topic of the original poster:

"Engine mods - why bother?"


There are plenty of cheaper alternatives rather than modding the Yaris for power. The HP per $ spent would be horrible (aside from nitrous).
All you will end up with is a $20K not-quite-mini-cooper S worth a blue book of $12K (or less). Yeah its fun, but trust me, nothing sucks more then trying to sell a car for 50% of what you have in it. Cause banks only loan money on blue book, supercharger or not. And people don't like to buy modded cars, cause most likely they had the crap beat out of them. And the quality of work done is always suspect. I ALWAYS look for the stock cars.

Stick to minor suspension, appearence, and ICE mods. I think the money would be more well spent there. What's appealing about this car is that it gets great MPG and is cheap. A $20K yaris that gets 25MPG won't be too appealing come resale time.

That's my opinion, and YMMV.
mikeukrainetzCanada · Jun 29, 2006#31
I dont think most people looking to add boost or high dollar mods are thinking about resale at all. Yaris is just a great base to start from - most everyone can afford to buy one new and put parts on it. People wanting performance right out of the box typically cant afford it, especially those looking to do small mods. Everyone keeps refering to the Mini, that car in my area used is 35 grand. I would kill the poor guy at the bank loan dept. from laughing too hard trying to pick up a car like that. I paid 17 grand for my Yaris, bit of a difference there.
If you want to leave the car stock great, if you want to mod it, great. I think in a couple of years the Yaris will be something similar to civics, there will be more cars than people to drive them and every car will have the same tin can exhaust and spoiler.
weeze-dogOhio · Jun 29, 2006#32
A new Mini S runs about $20K in the US, the regular mini is around $16K I think, before tax etc.
fnkngrvIn The Hotbox · Jun 29, 2006#33
Originally Posted by mikeukrainetz
I agree 100%. You can moderately boost the stock Yaris and will definitely holdup, not talking 6-8psi though. I dont understand this longevity idea though, why would stock cars have turbos and superchargers if the engines dont last?
To be honest it seems that the companies don't know what they are doing in general many times with turbos at least....case in point would be the leakage issues that dodge is experiencing with the SRT-4 2004-2005. Also subaru had some really bad luck in the 80s with the XT....I know that it is far from the 80s but those ones pop in the head quick. The people that I know that had/have those cars didn't drive stupid with them either and for example I know 3 peeps with SRT-4s that have between 15 and 25k with issues.

In reference to your other comment about being in diapers...I grew up in the eighties myself....I miss the old engines...that is why I have a big block 400 in my 60 Pontiac Bonne HD 2 door coupe👍 I would take a yenko over rice any day....but I love my toyotas!
mikeukrainetzCanada · Jun 29, 2006#34
Problem with cars nowadays is theyre mass produced to cust costs, dont have a large amount of r&d and are built cheap. New car models ten, fifteen years ago didnt change as drastically as they do now between model years, a keeping up with the jonses kind of situation.
(The chev small block was produced in its same form from 55 to sometime in the nineties.)
Blowing gaskets isnt really new to boosted engines nor to NA engines. Poor gasket quality and cast iron temperature in older engines, warpage and tolerances in newer engines. I had a 99 malibu which was notorious for intake gaskets....

I still prefer old to new, the Yaris is the first import Ive purchased and I love it. I own a 70 chevy pickup with a mild small block. Next month or two I will be getting a third gen camaro to build. Also have been looking for a 66 lincoln continental coupe or convertible.

Yenko is great if you have a hundred grand to blow on a rare muscle car.

My favorite car to this day is a 69 camaro rs/ss. (watch the power block on spike tv they are building a convertible from a new kit)

Anyway, I digress.
fnkngrvIn The Hotbox · Jun 29, 2006#35
good show man....good show
weeze-dogOhio · Jun 29, 2006#36
I don't watch the power block that much anymore cause the cast has changed so much its just not the same.

Though I do like to watch Jessi Combs on extreme 4x4, she's a hottie.
mikeukrainetzCanada · Jun 29, 2006#37
Yeah, whats up with trucks and the new roid monkey?

Jessi's fine... Courtney even better....

I like to watch horsepower and musclecar - like I said, love the muscle cars
BatesKingston · Jun 29, 2006#38
nothin hotter than a chick who can fab your whole frame from scratch.:D
TRD_YarisAustin, Texas · Jul 4, 2006#39
First of all, the cross drilled holes in brake rotors aren't FOR reduced weight (though it's a nice byproduct, though more surface area contact from non-drilled/slotted rotors has certain advantages ,too) it is to allow gasses from the brake pad to vent AND less importantly to allow air to pass over the rotor more effectively instead of displacing the air around the complete rotor hat...this aids in cooling JUST a bit.

NEXT, i don't recommend running aftermarket performance parts on the yaris unless you're willing to lose fuel efficiency..unless i'm missing something about electronic throttle-by-wire somehow being different than regular fuel injected motors. The claim of an intake and exhaust helping gas mileage is absurd..if your engine can flow more air then your computer will inject more fuel in return. Plus, these cars are tuned throughout the torque band for a certain amont of back pressure, if you reduce this for a better "top end" then you will hurt your normal daily driving zone..anything under ~5000 rpms..

To answer your question, the only real POWER ADDITIVE mod i would consider doing is a shot of Nitrous Oxide...a good wet system would work GREAT off the computer controlled (and sensored) throttlebody..wouldn't even need a mechanical "Wide open Throttle" activator....
Nitrous can be turned on when you want, can be tuned or jetted for different shots..and has very few downsides if installed by someone with skillz.


Non-HP increasing mods would be:
1)Reduction of Parasitic power Loss (lighter flywheel, lighter wheels/tire combo, underdrive pulleys, Yaris already has electric radiator fan and power steering pump which really helps the 106 hp reach a bit closer to the ground 👍 )
2)Suspension and brakes (performance pads & larger diameter, cross drilled rotor setup like AEM big rotor kits)
3)reduction of weight (strip your interior, carbon fiber body parts, lexan windows)
4)aerodynamics (not really helpful until 80 mph++)

Doesn't increase power but:
1)Transmission - installing LImited Slip differential WOULD REALLY HELP PERFORMANCE!!! so would shorter gearing..which with the MULTITUDE of 1nZ engined cars out there..one has probably got a SPORTIER transmission setup that would help acceleration and keeping in the "power band"
2)High Pressure Radiator Cap, cooler thermostat, Oil Cooler, Radiator shrouds to direct airflow...many MANY things to FURTHER ensure your car will LIVE LONG even if you press it hard!!! these should be the first mods you do to the car if you're planning on adding power.

sorry if these lists are incomplete/disorganized.. i need sleep.
TRD_YarisAustin, Texas · Jul 4, 2006#40
Originally Posted by TRD_Yaris
First of all, the cross drilled holes in brake rotors aren't FOR reduced weight (though it's a nice byproduct, though more surface area contact from non-drilled/slotted rotors has certain advantages ,too) it is to allow gasses from the brake pad to vent AND less importantly to allow air to pass over the rotor more effectively instead of displacing the air around the complete rotor hat...this aids in cooling JUST a bit.

NEXT, i don't recommend running aftermarket performance parts on the yaris unless you're willing to lose fuel efficiency..unless i'm missing something about electronic throttle-by-wire somehow being different than regular fuel injected motors. The claim of an intake and exhaust helping gas mileage is absurd..if your engine can flow more air then your computer will inject more fuel in return. Plus, these cars are tuned throughout the torque band for a certain amont of back pressure, if you reduce this for a better "top end" then you will hurt your normal daily driving zone..anything under ~5000 rpms..

To answer your question, the only real POWER ADDITIVE mod i would consider doing is a shot of Nitrous Oxide...a good wet system would work GREAT off the computer controlled (and sensored) throttlebody..wouldn't even need a mechanical "Wide open Throttle" activator....
Nitrous can be turned on when you want, can be tuned or jetted for different shots..and has very few downsides if installed by someone with skillz.


Non-HP increasing mods would be:
1)Reduction of Parasitic power Loss (lighter flywheel, lighter wheels/tire combo, underdrive pulleys, Yaris already has electric radiator fan and power steering pump which really helps the 106 hp reach a bit closer to the ground 👍 )
2)Suspension and brakes (performance pads & larger diameter, cross drilled rotor setup like AEM big rotor kits)
3)reduction of weight (strip your interior, carbon fiber body parts, lexan windows)
4)aerodynamics (not really helpful until 80 mph++)

Doesn't increase power but:
1)Transmission - installing LImited Slip differential WOULD REALLY HELP PERFORMANCE!!! so would shorter gearing..which with the MULTITUDE of 1nZ engined cars out there..one has probably got a SPORTIER transmission setup that would help acceleration and keeping in the "power band"
2)High Pressure Radiator Cap, cooler thermostat, Oil Cooler, Radiator shrouds to direct airflow...many MANY things to FURTHER ensure your car will LIVE LONG even if you press it hard!!! these should be the first mods you do to the car if you're planning on adding power.

sorry if these lists are incomplete/disorganized.. i need sleep.



Originally Posted by bullitt3570
Hey....To all of those involved in this ongoing debate....I'll say a few things and ask a couple of others...Because I certainly don't have all the answers. First of all, any car with modern technology and manufacturing standards( especially from Toyota) Should be able to handle a modest boost. Do all the comments by supposed experts about the Yaris "internals" not remember the most tuned car in America is a lowly previous generation civic. Jackson Racing bolt on supercharger anyone? Now is there a loss of duribility/reliability from this? Invariably, but Toyota reputation for bullet proof drivetrains seems to exceed that of the more advanced (i.e. Vtech), yet slightly more delicate powerplants from Honda. Anyway...internals aside...How about a low boost supercharger, intake, exhaust, coilovers, and remaping the ecu when all is said and done. Risk yes...Reward definately. Anyone who says go by a new GTI with 200 hp is missing the point. There is conservatively 5 grand in this approach, but as I have learned from other such projects,,,None of which have blown up,,,,You can do it in steps and thats half the fun.😁
yes, there is a MAJOR LOSS in durability/longevity in ANY honda setup w/ boost 👎 the rods in a d16z are pretty brittle, and only about 250 whp can be safely boosted off of an Integra LS block (b18a,b18b,b18b1)..300 if you like hand grenading trannies 👎
Plus, weight of internals was a big deal in the 1NZ-FE motor..this was not such a major deal on the Integra engines in which ROD limitations are easily over-run. I think you will have to consider the metal, manufacturing process (cast,vacuum cast,forged,etc), and coating AS WELL as the design of the rod itself (H-beam, I-beam, etc.etc.etc.).
I wouldn't be so sure about getting more than 180hp TO THE wheels before EITHER breaking a rod OR detonating due to the higher-than-ideal compression/design of the pistons..
mikeukrainetzCanada · Jul 4, 2006#41
Originally Posted by TRD_Yaris
First of all, the cross drilled holes in brake rotors aren't FOR reduced weight (though it's a nice byproduct, though more surface area contact from non-drilled/slotted rotors has certain advantages ,too) it is to allow gasses from the brake pad to vent AND less importantly to allow air to pass over the rotor more effectively instead of displacing the air around the complete rotor hat...this aids in cooling JUST a bit.

NEXT, i don't recommend running aftermarket performance parts on the yaris unless you're willing to lose fuel efficiency..unless i'm missing something about electronic throttle-by-wire somehow being different than regular fuel injected motors. The claim of an intake and exhaust helping gas mileage is absurd..if your engine can flow more air then your computer will inject more fuel in return. Plus, these cars are tuned throughout the torque band for a certain amont of back pressure, if you reduce this for a better "top end" then you will hurt your normal daily driving zone..anything under ~5000 rpms..

To answer your question, the only real POWER ADDITIVE mod i would consider doing is a shot of Nitrous Oxide...a good wet system would work GREAT off the computer controlled (and sensored) throttlebody..wouldn't even need a mechanical "Wide open Throttle" activator....
Nitrous can be turned on when you want, can be tuned or jetted for different shots..and has very few downsides if installed by someone with skillz.


Non-HP increasing mods would be:
1)Reduction of Parasitic power Loss (lighter flywheel, lighter wheels/tire combo, underdrive pulleys, Yaris already has electric radiator fan and power steering pump which really helps the 106 hp reach a bit closer to the ground 👍 )
2)Suspension and brakes (performance pads & larger diameter, cross drilled rotor setup like AEM big rotor kits)
3)reduction of weight (strip your interior, carbon fiber body parts, lexan windows)
4)aerodynamics (not really helpful until 80 mph++)

Doesn't increase power but:
1)Transmission - installing LImited Slip differential WOULD REALLY HELP PERFORMANCE!!! so would shorter gearing..which with the MULTITUDE of 1nZ engined cars out there..one has probably got a SPORTIER transmission setup that would help acceleration and keeping in the "power band"
2)High Pressure Radiator Cap, cooler thermostat, Oil Cooler, Radiator shrouds to direct airflow...many MANY things to FURTHER ensure your car will LIVE LONG even if you press it hard!!! these should be the first mods you do to the car if you're planning on adding power.

sorry if these lists are incomplete/disorganized.. i need sleep.
The only thing I have to say about cross drilled rotors is buy quality - I have had terrible rotors and great rotors. Larger cars will benefit more from crossed drilled than smaller, they extended the life of my pads and rotors three fold.

There is a benefit to exhaust and intake 'improvements' - this may be hard to quantify with cheap aftermarket parts but with flow improvements, read 'less turbulence', there will be a definite benefit. Im not talking buying a three inch exhaust and a race header to develop 'more' flow. Obviously this will burn more fuel.

Obviously these engines are tuned to backpressure but usually any engine can benefit from a reduction in back pressure in the exhaust system - this isnt a two stroke.

You recommend a nitrous system instead of a boosted system - personally I find nitrous a huge waste of time unless you drag race. If thats the case more often than not youll have someone with more money than brains running a 150 shot and melt themselves down.
Its assinign to assume the stock engine will not accept boost without seriously detrimental effects and long term longevity. Again, this is a function of stupidity not internals. These engines are built to extreme tolerances to the point of being almost termed balanced and blueprinted. In moderation any engine can accept boost, there wouldnt be kits to add turbos and superchargers if this wasnt the case. Any 'idiot' willing to push 15psi into a stock engine deserves an engine rebuid. There are alot more facts involved in these small displacement engines than simply bolting on a turbo. Im sure its possible to adjust the valve timing to reduce compression, engine timing, etc etc. Simply saying it cant / or shouldnt be done is ridiculous, personal opinion and accepting the possibilities something may go wrong are more appropriate.

As far as the other non HP upgrades they are all great ideas.

If you run the gammut with mods from boost to weight savings youll have yourself a very sporty 60 grand Yaris.

ANY performance upgrade short of lightening will undoubtedly increase fuel consumption - If you arent willing to accept this then why mod to begin with?
heylookitsjamesRiverside CA · Jul 4, 2006#42
"...buy cross-drilled for looks, slotted to wear your pads out faster, and normal to race with..."

-Rhys Millen at question and answer forum at D1GP, Fontana.


and mods that decrease rotating weight to gain performance decrease the amount of work the engine is doing, there by increasing gas milage... things like lightweight wheels, knife-edged cranks, lightweight flywheels (if they don't mess with the idle too much).
mikeukrainetzCanada · Jul 4, 2006#43
Originally Posted by heylookitsjames
"...buy cross-drilled for looks, slotted to wear your pads out faster, and normal to race with..."

-Rhys Millen at question and answer forum at D1GP, Fontana.


and mods that decrease rotating weight to gain performance decrease the amount of work the engine is doing, there by increasing gas milage... things like lightweight wheels, knife-edged cranks, lightweight flywheels (if they don't mess with the idle too much).

The rotors I used went on my 99 malibu - the car is fairly large with severly under designed brakes in the front. I dont use the brakes that much, rely on gearing or coasting instead and that car went through a set of pads every three months. Bought the rotors and matching pads and didnt change them again.

I know lightening components makes a huge difference on big engines. Worked on tons of chev v8's that prove that point 100%. Can there be a drastic difference on these engines? How much can these parts weigh in or affect such a small engine, low gross weight vehicle?
heylookitsjamesRiverside CA · Jul 4, 2006#44
Originally Posted by mikeukrainetz
I know lightening components makes a huge difference on big engines. Worked on tons of chev v8's that prove that point 100%. Can there be a drastic difference on these engines? How much can these parts weigh in or affect such a small engine, low gross weight vehicle?
I would assume that if you were to replace the flywheel and get some really lightweight wheels like regamaster or magnesium watanabes, you would feel a much more drastic difference than if you put the TRD muffler and cold air intake on. The car wouldn't be loud, and to some I'm sure that would be a drawback since it doesn't "sound fast", but it would be much more pleasurable to drive and probably dyno better.
mikeukrainetzCanada · Jul 4, 2006#45
I suppose thats true.

I look at it three ways

1)replace stock parts with lightweight units and gain acceleration and overall performance.

2)replace parts with HP producing parts to offset stock weight or aftermarket parts (eg. stock steel wheels / aftermarket larger dia wheels)

3)replace both stock parts with lighter parts and add aftermarket HP producing parts.

I still think that unless your losing 10lbs a corner, 40-50lbs interior etc etc you wont gain much.
They say a hundred pound drop is worth a tenth in the quarter - hard to imagine where you could shave a hundred or more pounds in the yaris.

Plus I still need my backseat so a flywheel which gains me 10lbs over stock and maybe a 200rpm the only difference Ill see is the 300 less in my bank account.
mikeukrainetzCanada · Jul 4, 2006#46
for invaluable engine information visit

http://www.hotrodders.com

most pertains to domestics but any questions can be asked or answered.
heylookitsjamesRiverside CA · Jul 4, 2006#47
Originally Posted by mikeukrainetz
I suppose thats true.

I look at it three ways

1)replace stock parts with lightweight units and gain acceleration and overall performance.

2)replace parts with HP producing parts to offset stock weight or aftermarket parts (eg. stock steel wheels / aftermarket larger dia wheels)

3)replace both stock parts with lighter parts and add aftermarket HP producing parts.

I still think that unless your losing 10lbs a corner, 40-50lbs interior etc etc you wont gain much.
They say a hundred pound drop is worth a tenth in the quarter - hard to imagine where you could shave a hundred or more pounds in the yaris.

Plus I still need my backseat so a flywheel which gains me 10lbs over stock and maybe a 200rpm the only difference Ill see is the 300 less in my bank account.
I'm not talking about the overall loss of weight of the car affecting performance... who cares about that, carbon hoods are for ricers...
I'm talking about the loss of ratational weight through the drive system. This is 100 fold more important than gutting your interior. You will feel the difference between a 17 lb wheel and a 7lb wheel, and you will feel the difference between a 15lb flywheel and 7lb flywheel. This is weight that the engine no longer has to fight to turn over.
BatesKingston · Jul 6, 2006#48
James is right, it'll rev way quicker, meaning you go faster.

But James, I've never heard a 4cyl sound fast, unless it had boost and I could hear a whistle. But maybe thats just me...
mikeukrainetzCanada · Jul 6, 2006#49
Maybe im just completely missing the boat on this but we are talking about a Yaris right? The 106 hp econobox? I would spend money on all those lightweight parts, flywheel etc if maybe this was a s2000 or rx7 with three times the HP. Those of you who actually race might notice a diff. like I said, I have only noticed a difference in larger displacement engines because thats all Ive built.
yarimanDelta,B.C. Canada · Jul 6, 2006#50
If you want to pick up some extra performance cheap, stick to the basics. Let it breathe, free flowing intake and exhaust. Lower gearing, the cheapest way is with smaller diameter wheel/tire combo, if you are planning on replacing your stock wheels. Lighter flywheel if you can do it cheap.